FSVERITY(1)

NAME

fsverity - userspace utility for fs-verity

SYNOPSIS

fsverity digest [OPTION...] FILE...
fsverity dump_metadata [OPTION...] TYPE FILE
fsverity enable [OPTION...] FILE
fsverity measure FILE...
fsverity sign [OPTION...] FILE OUT_SIGFILE

DESCRIPTION

fsverity is a userspace utility for fs-verity. fs-verity is a Linux kernel filesystem feature that does transparent on-demand verification of the contents of read-only files using Merkle trees.

fsverity can enable fs-verity on files, retrieve the digests of fs-verity files, and sign files for use with fs-verity (among other things). fsverity’s functionality is divided among various subcommands.

This manual page focuses on documenting all fsverity subcommands and options. For examples and more information about the fs-verity kernel feature, see the references at the end of this page.

OPTIONS

fsverity always accepts the following options:

--help
    Show the help, for either one subcommand or for all subcommands.

--version
    Show the version of fsverity-utils.

SUBCOMMANDS

  fsverity digest [OPTION...] FILE...

Compute the fs-verity digest of the given file(s). This is mainly intended to used in preparation for signing the digest. In some cases fsverity sign can be used instead to digest and sign the file in one step.

Options accepted by fsverity digest:

--block-size=BLOCK_SIZE
    The Merkle tree block size (in bytes) to use. This must be a power of 2 and at least twice the size of the hash values.

    Note that the Linux kernel implementations of fs-verity place further restrictions on the Merkle tree block size. Linux v6.2 and earlier require that the Merkle tree block size be equal to both the system page size and the filesystem block size. These values are often 4096. Linux v6.3 and later are more flexible; they require that the Merkle tree block size be a power of 2 that is greater than or equal to 1024 and less than or equal to the system page size and the filesystem block size. The default value of this option is 4096.

--compact
    When printing the file digest, only print the actual digest hex string; don’t print the algorithm name and filename.

--for-builtin-sig
    Format the file digest in a way that is compatible with the Linux kernel’s fs-verity built-in signature verification support. This means formatting it as a struct fsverity_formatted_digest. Use this option if you are using built-in signatures but are not using fsverity sign to do the signing.

--hash-alg=HASH_ALG
    The hash algorithm to use to build the Merkle tree. Valid options are sha256 and sha512. Default is sha256.

--out-merkle-tree=FILE
    Write the computed Merkle tree to the given file. The Merkle tree layout will be the same as that used by the Linux kernel’s FS_IOC_READ_VERITY_METADATA ioctl.

    Normally this option isn’t useful, but it can be needed in cases where the fs-verity metadata needs to be consumed by something other than one of the native Linux kernel implementations of fs-verity. This is not needed for file signing.

--out-descriptor=FILE
    Write the computed fs-verity descriptor to the given file.

    Normally this option isn’t useful, but it can be needed in cases where the fs-verity metadata needs to be consumed by something other than one of the native Linux kernel implementations of fs-verity. This is not needed for file signing.

--salt=SALT
    The salt to use in the Merkle tree, as a hex string. The salt is a value that is prepended to every hashed block; it can be used to personalize the hashing for a particular file or device. The default is no salt.

  fsverity dump_metadata [OPTION...] TYPE FILE

Dump the fs-verity metadata of the given file. The file must have fs-verity enabled, and the filesystem must support the FS_IOC_READ_VERITY_METADATA ioctl (it was added in Linux v5.12). This subcommand normally isn’t useful, but it can be useful in cases where a userspace server program is serving a verity file to a client which implements fs-verity compatible verification.

TYPE may be “merkle_tree”, “descriptor”, or “signature”, indicating the type of metadata to dump. “signature” refers to the built-in signature, if present; userspace-managed signatures will not be included.

Options accepted by fsverity dump_metadata:

--length=LENGTH
    Length in bytes to dump from the specified metadata item. Only accepted in combination with --offset.

--offset=offset
    Offset in bytes into the specified metadata item at which to start dumping. Only accepted in combination with --length.

  fsverity enable [OPTION...] FILE

Enable fs-verity on the specified file. This will only work if the filesystem supports fs-verity.

Options accepted by fsverity enable:

--block-size=BLOCK_SIZE
    Same as for fsverity digest.

--hash-alg=HASH_ALG
    Same as for fsverity digest.

--salt=SALT
    Same as for fsverity digest.

--signature=SIGFILE
    Specifies the built-in signature to apply to the file. SIGFILE must be a file that contains the signature in PKCS#7 DER format, e.g. as produced by the fsverity sign command.

    Note that this option is only needed if the Linux kernel’s fs-verity built-in signature verification support is being used. It is not needed if the signatures will be verified in userspace, as in that case the signatures should be stored separately.

  fsverity measure FILE...

Display the fs-verity digest of the given file(s). The files must have fs-verity enabled. The output will be the same as fsverity digest with the appropriate parameters, but fsverity measure will take constant time for each file regardless of the size of the file.

fsverity measure does not accept any options.

  fsverity sign [OPTION...] FILE OUT_SIGFILE

Sign the given file for fs-verity, in a way that is compatible with the Linux kernel’s fs-verity built-in signature verification support. The signature will be written to OUT_SIGFILE in PKCS#7 DER format.

The private key can be specified either by key file or by PKCS#11 token. To use a key file, provide --key and optionally --cert. To use a PKCS#11 token, provide --pkcs11-engine, --pkcs11-module, --cert, and optionally --pkcs11-keyid. PKCS#11 token support is unavailable if fsverity-utils was built with a version of OpenSSL that does not support PKCS#11 tokens.

fsverity sign should only be used if you need compatibility with fs-verity built-in signatures. It is not the only way to do signatures with fs-verity. For more information, see the fsverity-utils README.

Options accepted by fsverity sign:

--block-size=BLOCK_SIZE
    Same as for fsverity digest.

--cert=CERTFILE
    Specifies the file that contains the certificate, in PEM format. This option is required if KEYFILE contains only the private key and not also the certificate, or if a PKCS#11 token is used.

--hash-alg=HASH_ALG
    Same as for fsverity digest.

--key=KEYFILE
    Specifies the file that contains the private key, in PEM format. This option is required when not using a PKCS#11 token.

--out-descriptor=FILE
    Same as for fsverity digest.

--out-merkle-tree=FILE
    Same as for fsverity digest.

--pkcs11-engine=SOFILE
    Specifies the path to the OpenSSL PKCS#11 engine file. This typically will be a path to the libp11 .so file. This option is required when using a PKCS#11 token.

--pkcs11-keyid=KEYID
    Specifies the key identifier in the form of a PKCS#11 URI. If not provided, the default key associated with the token is used. This option is only applicable when using a PKCS#11 token.

--pkcs11-module=SOFILE
    Specifies the path to the PKCS#11 token-specific module library. This option is required when using a PKCS#11 token.

--salt=SALT
    Same as for fsverity digest.

SEE ALSO

For example commands and more information, see the README file for fsverity-utils (https://git.kernel.org/pub/scm/fs/fsverity/fsverity-utils.git/tree/README.md).

Also see the kernel documentation for fs-verity (https://www.kernel.org/doc/html/latest/filesystems/fsverity.html).