% \iffalse meta-comment
%
% File: tabularkv.dtx
% Version: 2026-05-13 v1.3
% Info: Tabular with key value interface
%
% Copyright (C)
%    2005, 2006 Heiko Oberdiek
%    2016-2026 Oberdiek Package Support Group
%    https://github.com/ho-tex/oberdiek/issues
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
% version 1.3c of this license or (at your option) any later
% version. This version of this license is in
%    https://www.latex-project.org/lppl/lppl-1-3c.txt
% and the latest version of this license is in
%    https://www.latex-project.org/lppl.txt
% and version 1.3 or later is part of all distributions of
% LaTeX version 2005/12/01 or later.
%
% This work has the LPPL maintenance status "maintained".
%
% The Current Maintainers of this work are
% Heiko Oberdiek and the Oberdiek Package Support Group
% https://github.com/ho-tex/tabularht/issues
%
% This work consists of the main source file tabularkv.dtx
% and the derived files
%    tabularkv.sty, tabularkv.pdf, tabularkv.ins, tabularkv.drv,
%    tabularkv-example.tex.
%
% Distribution:
%    CTAN:macros/latex/contrib/tabularht/tabularkv.dtx
%    CTAN:macros/latex/contrib/tabularht/tabularkv.pdf
%
% Unpacking:
%    (a) If tabularkv.ins is present:
%           tex tabularkv.ins
%    (b) Without tabularkv.ins:
%           tex tabularkv.dtx
%    (c) If you insist on using LaTeX
%           latex \let\install=y\input{tabularkv.dtx}
%        (quote the arguments according to the demands of your shell)
%
% Documentation:
%    (a) If tabularkv.drv is present:
%           latex tabularkv.drv
%    (b) Without tabularkv.drv:
%           latex tabularkv.dtx; ...
%    The class ltxdoc loads the configuration file ltxdoc.cfg
%    if available. Here you can specify further options, e.g.
%    use A4 as paper format:
%       \PassOptionsToClass{a4paper}{article}
%
%    Program calls to get the documentation (example):
%       pdflatex tabularkv.dtx
%       makeindex -s gind.ist tabularkv.idx
%       pdflatex tabularkv.dtx
%       makeindex -s gind.ist tabularkv.idx
%       pdflatex tabularkv.dtx
%
% Installation:
%    TDS:tex/latex/tabularht/tabularkv.sty
%    TDS:doc/latex/tabularht/tabularkv.pdf
%    TDS:doc/latex/tabularht/tabularkv-example.tex
%    TDS:source/latex/tabularht/tabularkv.dtx
%
%<*ignore>
\begingroup
  \catcode123=1 %
  \catcode125=2 %
  \def\x{LaTeX2e}%
\expandafter\endgroup
\ifcase 0\ifx\install y1\fi\expandafter
         \ifx\csname processbatchFile\endcsname\relax\else1\fi
         \ifx\fmtname\x\else 1\fi\relax
\else\csname fi\endcsname
%</ignore>
%<*install>
\input docstrip.tex
\Msg{************************************************************************}
\Msg{* Installation}
\Msg{* Package: tabularkv 2026-05-13 v1.3 Tabular with key value interface (HO)}
\Msg{************************************************************************}

\keepsilent
\askforoverwritefalse

\let\MetaPrefix\relax
\preamble

This is a generated file.

Project: tabularkv
Version: 2026-05-13 v1.3

Copyright (C)
   2005, 2006 Heiko Oberdiek
   2016-2026 Oberdiek Package Support Group

This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either
version 1.3c of this license or (at your option) any later
version. This version of this license is in
   https://www.latex-project.org/lppl/lppl-1-3c.txt
and the latest version of this license is in
   https://www.latex-project.org/lppl.txt
and version 1.3 or later is part of all distributions of
LaTeX version 2005/12/01 or later.

This work has the LPPL maintenance status "maintained".

The Current Maintainers of this work are
Heiko Oberdiek and the Oberdiek Package Support Group
https://github.com/ho-tex/tabularht/issues


This work consists of the main source file tabularkv.dtx
and the derived files
   tabularkv.sty, tabularkv.pdf, tabularkv.ins, tabularkv.drv,
   tabularkv-example.tex.

\endpreamble
\let\MetaPrefix\DoubleperCent

\generate{%
  \file{tabularkv.ins}{\from{tabularkv.dtx}{install}}%
  \file{tabularkv.drv}{\from{tabularkv.dtx}{driver}}%
  \usedir{tex/latex/tabularht}%
  \file{tabularkv.sty}{\from{tabularkv.dtx}{package}}%
  \usedir{doc/latex/tabularht}%
  \file{tabularkv-example.tex}{\from{tabularkv.dtx}{example}}%
}

\catcode32=13\relax% active space
\let =\space%
\Msg{************************************************************************}
\Msg{*}
\Msg{* To finish the installation you have to move the following}
\Msg{* file into a directory searched by TeX:}
\Msg{*}
\Msg{*     tabularkv.sty}
\Msg{*}
\Msg{* To produce the documentation run the file `tabularkv.drv'}
\Msg{* through LaTeX.}
\Msg{*}
\Msg{* Happy TeXing!}
\Msg{*}
\Msg{************************************************************************}

\endbatchfile
%</install>
%<*ignore>
\fi
%</ignore>
%<*driver>
\NeedsTeXFormat{LaTeX2e}
\ProvidesFile{tabularkv.drv}%
  [2026-05-13 v1.3 Tabular with key value interface (HO)]%
\documentclass{ltxdoc}
\usepackage{holtxdoc}[2011/11/22]
\begin{document}
  \DocInput{tabularkv.dtx}%
\end{document}
%</driver>
% \fi
%
%
%
% \GetFileInfo{tabularkv.drv}
%
% \title{The \xpackage{tabularkv} package}
% \date{2026-05-13 v1.3}
% \author{Heiko Oberdiek\thanks
% {Please report any issues at \url{https://github.com/ho-tex/tabularht/issues}}}
%
% \maketitle
%
% \begin{abstract}
% This package adds a key value interface for tabular
% by the new environment \texttt{tabularkv}. Thus the
% \TeX\ source code looks better by named parameters,
% especially if package \xpackage{tabularht} is used.
% \end{abstract}
%
% \tableofcontents
%
% \section{Usage}
% \begin{quote}
%   |\usepackage{tabularkv}|
% \end{quote}
% The package provides the environment |tabularkv|
% that takes an optional argument with tabular
% parameters:
% \begin{description}
% \item[\texttt{width}:] width specification, "tabular*" is used.
% \item[\texttt{x}:]
%   width specification, |tabularx| is used,
%              package \xpackage{tabularx} must be loaded.
% \item[\texttt{height}:]
%   height specification, see package \xpackage{tabularht}.
% \item[\texttt{valign}:] vertical positioning, this option is optional;\\
%   values: top, bottom, center.
% \end{description}
% Parameter \xoption{valign} optional, the following are
% equivalent:
% \begin{quote}
%  |\begin{tabularkv}[|\dots|, valign=top]{l}|\dots|\end{tabularkv}|\\
%  |\begin{tabularkv}[|\dots|][t]{l}|\dots|\end{tabularkv}|
% \end{quote}
%
% \subsection{Example}
%
%    \begin{macrocode}
%<*example>
\documentclass{article}
\usepackage{tabularkv}

\begin{document}
\fbox{%
  \begin{tabularkv}[
    width=4in,
    height=1in,
    valign=center
  ]{@{}l@{\extracolsep{\fill}}r@{}}
    upper left corner & upper right corner\\
    \noalign{\vfill}%
    \multicolumn{2}{@{}c@{}}{bounding box}\\
    \noalign{\vfill}%
    lower left corner & lower right corner\\
  \end{tabularkv}%
}
\end{document}
%</example>
%    \end{macrocode}
%
% \StopEventually{
% }
%
% \section{Implementation}
%
%    \begin{macrocode}
%<*package>
%    \end{macrocode}
%    Package identification.
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{tabularkv}%
  [2026-05-13 v1.3 Tabular with key value interface (HO)]
%    \end{macrocode}
%
%    \begin{macrocode}
\RequirePackage{keyval}
\RequirePackage{tabularht}

\let\tabKV@star@x\@empty
\let\tabKV@width\@empty
\let\tabKV@valign\@empty

\define@key{tabKV}{height}{%
  \setlength{\dimen@}{#1}%
  \edef\@toarrayheight{to\the\dimen@}%
}
\define@key{tabKV}{width}{%
  \def\tabKV@width{{#1}}%
  \def\tabKV@star@x{*}%
}
\define@key{tabKV}{x}{%
  \def\tabKV@width{{#1}}%
  \def\tabKV@star@x{x}%
}
\define@key{tabKV}{valign}{%
  \edef\tabKV@valign{[\@car #1c\@nil]}%
}
%    \end{macrocode}
%    \begin{macrocode}
\newenvironment{tabularkv}[1][]{%
  \setkeys{tabKV}{#1}%
  \@nameuse{%
    tabular\tabKV@star@x\expandafter\expandafter\expandafter
  }%
  \expandafter\tabKV@width\tabKV@valign
}{%
  \@nameuse{endtabular\tabKV@star@x}%
}
%    \end{macrocode}
%
%    \begin{macrocode}
%</package>
%    \end{macrocode}
%
% \section{Installation}
%
% \subsection{Download}
%
% \paragraph{Package.} This package is available on
% CTAN\footnote{\CTANpkg{tabularkv}}:
% \begin{description}
% \item[\CTAN{macros/latex/contrib/tabularht/tabularkv.dtx}] The source file.
% \item[\CTAN{macros/latex/contrib/tabularht/tabularkv.pdf}] Documentation.
% \end{description}
%
%
% \subsection{Package installation}
%
% \paragraph{Unpacking.} The \xfile{.dtx} file is a self-extracting
% \docstrip\ archive. The files are extracted by running the
% \xfile{.dtx} through \plainTeX:
% \begin{quote}
%   \verb|tex tabularkv.dtx|
% \end{quote}
%
% \paragraph{TDS.} Now the different files must be moved into
% the different directories in your installation TDS tree
% (also known as \xfile{texmf} tree):
% \begin{quote}
% \def\t{^^A
% \begin{tabular}{@{}>{\ttfamily}l@{ $\rightarrow$ }>{\ttfamily}l@{}}
%   tabularkv.sty & tex/latex/tabularht/tabularkv.sty\\
%   tabularkv.pdf & doc/latex/tabularht/tabularkv.pdf\\
%   tabularkv-example.tex & doc/latex/tabularht/tabularkv-example.tex\\
%   tabularkv.dtx & source/latex/tabularht/tabularkv.dtx\\
% \end{tabular}^^A
% }^^A
% \sbox0{\t}^^A
% \ifdim\wd0>\linewidth
%   \begingroup
%     \advance\linewidth by\leftmargin
%     \advance\linewidth by\rightmargin
%   \edef\x{\endgroup
%     \def\noexpand\lw{\the\linewidth}^^A
%   }\x
%   \def\lwbox{^^A
%     \leavevmode
%     \hbox to \linewidth{^^A
%       \kern-\leftmargin\relax
%       \hss
%       \usebox0
%       \hss
%       \kern-\rightmargin\relax
%     }^^A
%   }^^A
%   \ifdim\wd0>\lw
%     \sbox0{\small\t}^^A
%     \ifdim\wd0>\linewidth
%       \ifdim\wd0>\lw
%         \sbox0{\footnotesize\t}^^A
%         \ifdim\wd0>\linewidth
%           \ifdim\wd0>\lw
%             \sbox0{\scriptsize\t}^^A
%             \ifdim\wd0>\linewidth
%               \ifdim\wd0>\lw
%                 \sbox0{\tiny\t}^^A
%                 \ifdim\wd0>\linewidth
%                   \lwbox
%                 \else
%                   \usebox0
%                 \fi
%               \else
%                 \lwbox
%               \fi
%             \else
%               \usebox0
%             \fi
%           \else
%             \lwbox
%           \fi
%         \else
%           \usebox0
%         \fi
%       \else
%         \lwbox
%       \fi
%     \else
%       \usebox0
%     \fi
%   \else
%     \lwbox
%   \fi
% \else
%   \usebox0
% \fi
% \end{quote}
% If you have a \xfile{docstrip.cfg} that configures and enables \docstrip's
% TDS installing feature, then some files can already be in the right
% place, see the documentation of \docstrip.
%
% \subsection{Refresh file name databases}
%
% If your \TeX~distribution
% (\TeX\,Live, \mikTeX, \dots) relies on file name databases, you must refresh
% these. For example, \TeX\,Live\ users run \verb|texhash| or
% \verb|mktexlsr|.
%
% \subsection{Some details for the interested}
%
% \paragraph{Unpacking with \LaTeX.}
% The \xfile{.dtx} chooses its action depending on the format:
% \begin{description}
% \item[\plainTeX:] Run \docstrip\ and extract the files.
% \item[\LaTeX:] Generate the documentation.
% \end{description}
% If you insist on using \LaTeX\ for \docstrip\ (really,
% \docstrip\ does not need \LaTeX), then inform the autodetect routine
% about your intention:
% \begin{quote}
%   \verb|latex \let\install=y\input{tabularkv.dtx}|
% \end{quote}
% Do not forget to quote the argument according to the demands
% of your shell.
%
% \paragraph{Generating the documentation.}
% You can use both the \xfile{.dtx} or the \xfile{.drv} to generate
% the documentation. The process can be configured by the
% configuration file \xfile{ltxdoc.cfg}. For instance, put this
% line into this file, if you want to have A4 as paper format:
% \begin{quote}
%   \verb|\PassOptionsToClass{a4paper}{article}|
% \end{quote}
% An example follows how to generate the
% documentation with pdf\LaTeX:
% \begin{quote}
%\begin{verbatim}
%pdflatex tabularkv.dtx
%makeindex -s gind.ist tabularkv.idx
%pdflatex tabularkv.dtx
%makeindex -s gind.ist tabularkv.idx
%pdflatex tabularkv.dtx
%\end{verbatim}
% \end{quote}
%
% \begin{History}
%   \begin{Version}{2005/09/22 v1.0}
%   \item
%     First public version.
%   \end{Version}
%   \begin{Version}{2006/02/20 v1.1}
%   \item
%     DTX framework.
%   \item
%     Code is not changed.
%   \end{Version}
%   \begin{Version}{2016/05/16 v1.2}
%   \item
%     Documentation updates.
%   \end{Version}
%   \begin{Version}{2026-05-13 v1.3}
%   \item Updated ctan location to \texttt{tabularht} repository.
%   \end{Version}
% \end{History}
%
% \PrintIndex
%
% \Finale
\endinput
