Pro Git

# Git Basics

If you can read only one chapter to get going with Git, this is it. This chapter covers every basic command you need to do the vast majority of the things you’ll eventually spend your time doing with Git. By the end of the chapter, you should be able to configure and initialize a repository, begin and stop tracking files, and stage and commit changes. We’ll also show you how to set up Git to ignore certain files and file patterns, how to undo mistakes quickly and easily, how to browse the history of your project and view changes between commits, and how to push and pull from remote repositories.

# Getting a Git Repository

You can get a Git project using two main approaches. The first takes an existing project or directory and imports it into Git. The second clones an existing Git repository from another server.

## Initializing a Repository in an Existing Directory

If you’re starting to track an existing project in Git, you need to go to the project’s directory and type:

    $ git init

This creates a new subdirectory named `.git` that contains all of your necessary repository files – a Git repository skeleton. At this point, nothing in your project is tracked yet. (See Git Internals for more information about exactly what files are contained in the `.git` directory you just created.)

If you want to start version-controlling existing files (as opposed to an empty directory), you should probably begin tracking those files and do an initial commit. You can accomplish that with a few `git add` commands that specify the files you want to track, followed by a `git commit`:

    $ git add *.c
    $ git add LICENSE
    $ git commit -m 'initial project version'

We’ll go over what these commands do in just a minute. At this point, you have a Git repository with tracked files and an initial commit.

## Cloning an Existing Repository

If you want to get a copy of an existing Git repository – for example, a project you’d like to contribute to – the command you need is `git clone`. If you’re familiar with other VCS systems such as Subversion, you’ll notice that the command is "clone" and not "checkout". This is an important distinction – instead of getting just a working copy, Git receives a full copy of nearly all data that the server has. Every version of every file for the history of the project is pulled down by default when you run `git clone`. In fact, if your server disk gets corrupted, you can often use nearly any of the clones on any client to set the server back to the state it was in when it was cloned (you may lose some server-side hooks and such, but all the versioned data would be there – see Getting Git on a Server for more details).

You clone a repository with `git clone [url]`. For example, if you want to clone the Git linkable library called libgit2, you can do so like this:

    $ git clone https://github.com/libgit2/libgit2

That creates a directory named “libgit2”, initializes a `.git` directory inside it, pulls down all the data for that repository, and checks out a working copy of the latest version. If you go into the new `libgit2` directory, you’ll see the project files in there, ready to be worked on or used. If you want to clone the repository into a directory named something other than “libgit2”, you can specify that as the next command-line option:

    $ git clone https://github.com/libgit2/libgit2 mylibgit

That command does the same thing as the previous one, but the target directory is called `mylibgit`.

Git has a number of different transfer protocols you can use. The previous example uses the `https://` protocol, but you may also see `git://` or `user@server:path/to/repo.git`, which uses the SSH transfer protocol. Getting Git on a Server will introduce all of the available options the server can set up to access your Git repository and the pros and cons of each.

# Recording Changes to the Repository

You have a bona fide Git repository and a checkout or working copy of the files for that project. You need to make some changes and commit snapshots of those changes into your repository each time the project reaches a state you want to record.

Remember that each file in your working directory can be in one of two states: tracked or untracked. Tracked files are files that were in the last snapshot; they can be unmodified, modified, or staged. Untracked files are everything else – any files in your working directory that were not in your last snapshot and are not in your staging area. When you first clone a repository, all of your files will be tracked and unmodified because Git just checked them out and you haven’t edited anything.

As you edit files, Git sees them as modified, because you’ve changed them since your last commit. You stage these modified files and then commit all your staged changes, and the cycle repeats.

Figure 2-1. The lifecycle of the status of your files.

## Checking the Status of Your Files

The main tool you use to determine which files are in which state is the `git status` command. If you run this command directly after a clone, you should see something like this:

    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    nothing to commit, working directory clean

This means you have a clean working directory – in other words, there are no tracked and modified files. Git also doesn’t see any untracked files, or they would be listed here. Finally, the command tells you which branch you’re on and informs you that it has not diverged from the same branch on the server. For now, that branch is always “master”, which is the default; you won’t worry about it here. Git Branching will go over branches and references in detail.

Let’s say you add a new file to your project, a simple README file. If the file didn’t exist before, and you run `git status`, you see your untracked file like so:

    $ echo 'My Project' &gt; README
    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Untracked files:
      (use "git add &lt;file&gt;..." to include in what will be committed)

        README

    nothing added to commit but untracked files present (use "git add" to track)

You can see that your new README file is untracked, because it’s under the “Untracked files” heading in your status output. Untracked basically means that Git sees a file you didn’t have in the previous snapshot (commit); Git won’t start including it in your commit snapshots until you explicitly tell it to do so. It does this so you don’t accidentally begin including generated binary files or other files that you did not mean to include. You do want to start including README, so let’s start tracking the file.

## Tracking New Files

In order to begin tracking a new file, you use the command `git add`. To begin tracking the README file, you can run this:

    $ git add README

If you run your status command again, you can see that your README file is now tracked and staged to be committed:

    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        new file:   README

You can tell that it’s staged because it’s under the “Changes to be committed” heading. If you commit at this point, the version of the file at the time you ran `git add` is what will be in the historical snapshot. You may recall that when you ran `git init` earlier, you then ran `git add (files)` – that was to begin tracking files in your directory. The `git add` command takes a path name for either a file or a directory; if it’s a directory, the command adds all the files in that directory recursively.

## Staging Modified Files

Let’s change a file that was already tracked. If you change a previously tracked file called `CONTRIBUTING.md` and then run your `git status` command again, you get something that looks like this:

    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        new file:   README

    Changes not staged for commit:
      (use "git add &lt;file&gt;..." to update what will be committed)
      (use "git checkout -- &lt;file&gt;..." to discard changes in working directory)

        modified:   CONTRIBUTING.md

The `CONTRIBUTING.md` file appears under a section named “Changes not staged for commit” – which means that a file that is tracked has been modified in the working directory but not yet staged. To stage it, you run the `git add` command. `git add` is a multipurpose command – you use it to begin tracking new files, to stage files, and to do other things like marking merge-conflicted files as resolved. It may be helpful to think of it more as “add this content to the next commit” rather than “add this file to the project”. Let’s run `git add` now to stage the `CONTRIBUTING.md` file, and then run `git status` again:

    $ git add CONTRIBUTING.md
    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        new file:   README
        modified:   CONTRIBUTING.md

Both files are staged and will go into your next commit. At this point, suppose you remember one little change that you want to make in `CONTRIBUTING.md` before you commit it. You open it again and make that change, and you’re ready to commit. However, let’s run `git status` one more time:

    $ vim CONTRIBUTING.md
    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        new file:   README
        modified:   CONTRIBUTING.md

    Changes not staged for commit:
      (use "git add &lt;file&gt;..." to update what will be committed)
      (use "git checkout -- &lt;file&gt;..." to discard changes in working directory)

        modified:   CONTRIBUTING.md

What the heck? Now `CONTRIBUTING.md` is listed as both staged and unstaged. How is that possible? It turns out that Git stages a file exactly as it is when you run the `git add` command. If you commit now, the version of `CONTRIBUTING.md` as it was when you last ran the `git add` command is how it will go into the commit, not the version of the file as it looks in your working directory when you run `git commit`. If you modify a file after you run `git add`, you have to run `git add` again to stage the latest version of the file:

    $ git add CONTRIBUTING.md
    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        new file:   README
        modified:   CONTRIBUTING.md

## Short Status

While the `git status` output is pretty comprehensive, it’s also quite wordy. Git also has a short status flag so you can see your changes in a more compact way. If you run `git status -s` or `git status --short` you get a far more simplified output from the command:

    $ git status -s
     M README
    MM Rakefile
    A  lib/git.rb
    M  lib/simplegit.rb
    ?? LICENSE.txt

New files that aren’t tracked have a `??` next to them, new files that have been added to the staging area have an `A`, modified files have an `M` and so on. There are two columns to the output - the left-hand column indicates the status of the staging area and the right-hand column indicates the status of the working tree. So for example in that output, the `README` file is modified in the working directory but not yet staged, while the `lib/simplegit.rb` file is modified and staged. The `Rakefile` was modified, staged and then modified again, so there are changes to it that are both staged and unstaged.

## Ignoring Files

Often, you’ll have a class of files that you don’t want Git to automatically add or even show you as being untracked. These are generally automatically generated files such as log files or files produced by your build system. In such cases, you can create a file listing patterns to match them named `.gitignore`. Here is an example `.gitignore` file:

    $ cat .gitignore
    *.[oa]
    *~

The first line tells Git to ignore any files ending in “.o” or “.a” – object and archive files that may be the product of building your code. The second line tells Git to ignore all files whose names end with a tilde (`~`), which is used by many text editors such as Emacs to mark temporary files. You may also include a log, tmp, or pid directory; automatically generated documentation; and so on. Setting up a `.gitignore` file before you get going is generally a good idea so you don’t accidentally commit files that you really don’t want in your Git repository.

The rules for the patterns you can put in the `.gitignore` file are as follows:

- Blank lines or lines starting with `#` are ignored.

- Standard glob patterns work.

- You can start patterns with a forward slash (`/`) to avoid recursivity.

- You can end patterns with a forward slash (`/`) to specify a directory.

- You can negate a pattern by starting it with an exclamation point (`!`).

Glob patterns are like simplified regular expressions that shells use. An asterisk (`*`) matches zero or more characters; `[abc]` matches any character inside the brackets (in this case a, b, or c); a question mark (`?`) matches a single character; and brackets enclosing characters separated by a hyphen (`[0-9]`) matches any character between them (in this case 0 through 9). You can also use two asterisks to match nested directories; `a/**/z` would match `a/z`, `a/b/z`, `a/b/c/z`, and so on.

Here is another example .gitignore file:

    # no .a files
    *.a

    # but do track lib.a, even though you're ignoring .a files above
    !lib.a

    # only ignore the TODO file in the current directory, not subdir/TODO
    /TODO

    # ignore all files in the build/ directory
    build/

    # ignore doc/notes.txt, but not doc/server/arch.txt
    doc/*.txt

    # ignore all .pdf files in the doc/ directory
    doc/**/*.pdf

###### Tip

GitHub maintains a fairly comprehensive list of good `.gitignore` file examples for dozens of projects and languages at https://github.com/github/gitignore if you want a starting point for your project.

## Viewing Your Staged and Unstaged Changes

If the `git status` command is too vague for you – you want to know exactly what you changed, not just which files were changed – you can use the `git diff` command. We’ll cover `git diff` in more detail later, but you’ll probably use it most often to answer these two questions: What have you changed but not yet staged? And what have you staged that you are about to commit? Although `git status` answers those questions very generally by listing the file names, `git diff` shows you the exact lines added and removed – the patch, as it were.

Let’s say you edit and stage the `README` file again and then edit the `CONTRIBUTING.md` file without staging it. If you run your `git status` command, you once again see something like this:

    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        modified:   README

    Changes not staged for commit:
      (use "git add &lt;file&gt;..." to update what will be committed)
      (use "git checkout -- &lt;file&gt;..." to discard changes in working directory)

        modified:   CONTRIBUTING.md

To see what you’ve changed but not yet staged, type `git diff` with no other arguments:

    $ git diff
    diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md
    index 8ebb991..643e24f 100644
    --- a/CONTRIBUTING.md
    +++ b/CONTRIBUTING.md
    @@ -65,7 +65,8 @@ branch directly, things can get messy.
     Please include a nice description of your changes when you submit your PR;
     if we have to read the whole diff to figure out why you're contributing
     in the first place, you're less likely to get feedback and have your change
    -merged in.
    +merged in. Also, split your changes into comprehensive chunks if your patch is
    +longer than a dozen lines.

     If you are starting to work on a particular area, feel free to submit a PR
     that highlights your work in progress (and note in the PR title that it's

That command compares what is in your working directory with what is in your staging area. The result tells you the changes you’ve made that you haven’t yet staged.

If you want to see what you’ve staged that will go into your next commit, you can use `git diff --staged`. This command compares your staged changes to your last commit:

    $ git diff --staged
    diff --git a/README b/README
    new file mode 100644
    index 0000000..03902a1
    --- /dev/null
    +++ b/README
    @@ -0,0 +1 @@
    +My Project

It’s important to note that `git diff` by itself doesn’t show all changes made since your last commit – only changes that are still unstaged. This can be confusing, because if you’ve staged all of your changes, `git diff` will give you no output.

For another example, if you stage the `CONTRIBUTING.md` file and then edit it, you can use `git diff` to see the changes in the file that are staged and the changes that are unstaged. If our environment looks like this:

    $ git add CONTRIBUTING.md
    $ echo '# test line' &gt;&gt; CONTRIBUTING.md
    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        modified:   CONTRIBUTING.md

    Changes not staged for commit:
      (use "git add &lt;file&gt;..." to update what will be committed)
      (use "git checkout -- &lt;file&gt;..." to discard changes in working directory)

        modified:   CONTRIBUTING.md

Now you can use `git diff` to see what is still unstaged:

    $ git diff
    diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md
    index 643e24f..87f08c8 100644
    --- a/CONTRIBUTING.md
    +++ b/CONTRIBUTING.md
    @@ -119,3 +119,4 @@ at the
     ## Starter Projects

     See our [projects list](https://github.com/libgit2/libgit2/blob/development/PROJECTS.md).
    +# test line

and `git diff --cached` to see what you’ve staged so far (`--staged` and `--cached` are synonyms):

    $ git diff --cached
    diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md
    index 8ebb991..643e24f 100644
    --- a/CONTRIBUTING.md
    +++ b/CONTRIBUTING.md
    @@ -65,7 +65,8 @@ branch directly, things can get messy.
     Please include a nice description of your changes when you submit your PR;
     if we have to read the whole diff to figure out why you're contributing
     in the first place, you're less likely to get feedback and have your change
    -merged in.
    +merged in. Also, split your changes into comprehensive chunks if your patch is
    +longer than a dozen lines.

     If you are starting to work on a particular area, feel free to submit a PR
     that highlights your work in progress (and note in the PR title that it's

###### Note

# Git Diff in an External Tool

We will continue to use the `git diff` command in various ways throughout the rest of the book. There is another way to look at these diffs if you prefer a graphical or external diff viewing program instead. If you run `git difftool` instead of `git diff`, you can view any of these diffs in software like emerge, vimdiff and many more (including commercial products). Run `git difftool --tool-help` to see what is available on your system.

## Committing Your Changes

Now that your staging area is set up the way you want it, you can commit your changes. Remember that anything that is still unstaged – any files you have created or modified that you haven’t run `git add` on since you edited them – won’t go into this commit. They will stay as modified files on your disk. In this case, let’s say that the last time you ran `git status`, you saw that everything was staged, so you’re ready to commit your changes. The simplest way to commit is to type `git commit`:

    $ git commit

Doing so launches your editor of choice. (This is set by your shell’s `$EDITOR` environment variable – usually vim or emacs, although you can configure it with whatever you want using the `git config --global core.editor` command as you saw in Getting Started).

The editor displays the following text (this example is a Vim screen):

    # Please enter the commit message for your changes. Lines starting
    # with '#' will be ignored, and an empty message aborts the commit.
    # On branch master
    # Your branch is up-to-date with 'origin/master'.
    #
    # Changes to be committed:
    #	new file:   README
    #	modified:   CONTRIBUTING.md
    #
    ~
    ~
    ~
    ".git/COMMIT_EDITMSG" 9L, 283C

You can see that the default commit message contains the latest output of the `git status` command commented out and one empty line on top. You can remove these comments and type your commit message, or you can leave them there to help you remember what you’re committing. (For an even more explicit reminder of what you’ve modified, you can pass the `-v` option to `git commit`. Doing so also puts the diff of your change in the editor so you can see exactly what changes you’re committing.) When you exit the editor, Git creates your commit with that commit message (with the comments and diff stripped out).

Alternatively, you can type your commit message inline with the `commit` command by specifying it after a `-m` flag, like this:

    $ git commit -m "Story 182: Fix benchmarks for speed"
    [master 463dc4f] Story 182: Fix benchmarks for speed
     2 files changed, 2 insertions(+)
     create mode 100644 README

Now you’ve created your first commit! You can see that the commit has given you some output about itself: which branch you committed to (`master`), what SHA-1 checksum the commit has (`463dc4f`), how many files were changed, and statistics about lines added and removed in the commit.

Remember that the commit records the snapshot you set up in your staging area. Anything you didn’t stage is still sitting there modified; you can do another commit to add it to your history. Every time you perform a commit, you’re recording a snapshot of your project that you can revert to or compare to later.

## Skipping the Staging Area

Although it can be amazingly useful for crafting commits exactly how you want them, the staging area is sometimes a bit more complex than you need in your workflow. If you want to skip the staging area, Git provides a simple shortcut. Adding the `-a` option to the `git commit` command makes Git automatically stage every file that is already tracked before doing the commit, letting you skip the `git add` part:

    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes not staged for commit:
      (use "git add &lt;file&gt;..." to update what will be committed)
      (use "git checkout -- &lt;file&gt;..." to discard changes in working directory)

        modified:   CONTRIBUTING.md

    no changes added to commit (use "git add" and/or "git commit -a")
    $ git commit -a -m 'added new benchmarks'
    [master 83e38c7] added new benchmarks
     1 file changed, 5 insertions(+), 0 deletions(-)

Notice how you don’t have to run `git add` on the `CONTRIBUTING.md` file in this case before you commit. That’s because the `-a` flag includes all changed files. This is convenient, but be careful; sometimes this flag will cause you to include unwanted changes.

## Removing Files

To remove a file from Git, you have to remove it from your tracked files (more accurately, remove it from your staging area) and then commit. The `git rm` command does that, and also removes the file from your working directory so you don’t see it as an untracked file the next time around.

If you simply remove the file from your working directory, it shows up under the “Changed but not updated” (that is, unstaged) area of your `git status` output:

    $ rm PROJECTS.md
    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes not staged for commit:
      (use "git add/rm &lt;file&gt;..." to update what will be committed)
      (use "git checkout -- &lt;file&gt;..." to discard changes in working directory)

            deleted:    PROJECTS.md

    no changes added to commit (use "git add" and/or "git commit -a")

Then, if you run `git rm`, it stages the file’s removal:

    $ git rm PROJECTS.md
    rm 'PROJECTS.md'
    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        deleted:    PROJECTS.md

The next time you commit, the file will be gone and no longer tracked. If you modified the file and added it to the index already, you must force the removal with the `-f` option. This is a safety feature to prevent accidental removal of data that hasn’t yet been recorded in a snapshot and that can’t be recovered from Git.

Another useful thing you may want to do is to keep the file in your working tree but remove it from your staging area. In other words, you may want to keep the file on your hard drive but not have Git track it anymore. This is particularly useful if you forgot to add something to your `.gitignore` file and accidentally staged it, like a large log file or a bunch of `.a` compiled files. To do this, use the `--cached` option:

    $ git rm --cached README

You can pass files, directories, and file-glob patterns to the `git rm` command. That means you can do things such as:

    $ git rm log/\*.log

Note the backslash (`\`) in front of the `*`. This is necessary because Git does its own filename expansion in addition to your shell’s filename expansion. This command removes all files that have the `.log` extension in the `log/` directory. Or, you can do something like this:

    $ git rm \*~

This command removes all files whose names end with a `~`.

## Moving Files

Unlike many other VCS systems, Git doesn’t explicitly track file movement. If you rename a file in Git, no metadata is stored in Git that tells it you renamed the file. However, Git is pretty smart about figuring that out after the fact – we’ll deal with detecting file movement a bit later.

Thus it’s a bit confusing that Git has a `mv` command. If you want to rename a file in Git, you can run something like:

    $ git mv file_from file_to

and it works fine. In fact, if you run something like this and look at the status, you’ll see that Git considers it a renamed file:

    $ git mv README.md README
    $ git status
    On branch master
    Your branch is up-to-date with 'origin/master'.
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        renamed:    README.md -&gt; README

However, this is equivalent to running something like this:

    $ mv README.md README
    $ git rm README.md
    $ git add README

Git figures out that it’s a rename implicitly, so it doesn’t matter if you rename a file that way or with the `mv` command. The only real difference is that `mv` is one command instead of three – it’s a convenience function. More importantly, you can use any tool you like to rename a file, and address the add/rm later, before you commit.

# Viewing the Commit History

After you have created several commits, or if you have cloned a repository with an existing commit history, you’ll probably want to look back to see what has happened. The most basic and powerful tool to do this is the `git log` command.

These examples use a very simple project called “simplegit”. To get the project, run

    $ git clone https://github.com/schacon/simplegit-progit

When you run `git log` in this project, you should get output that looks something like this:

    $ git log
    commit ca82a6dff817ec66f44342007202690a93763949
    Author: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Mon Mar 17 21:52:11 2008 -0700

        changed the version number

    commit 085bb3bcb608e1e8451d4b2432f8ecbe6306e7e7
    Author: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Sat Mar 15 16:40:33 2008 -0700

        removed unnecessary test

    commit a11bef06a3f659402fe7563abf99ad00de2209e6
    Author: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Sat Mar 15 10:31:28 2008 -0700

        first commit

By default, with no arguments, `git log` lists the commits made in that repository in reverse chronological order – that is, the most recent commits show up first. As you can see, this command lists each commit with its SHA-1 checksum, the author’s name and email, the date written, and the commit message.

A huge number and variety of options to the `git log` command are available to show you exactly what you’re looking for. Here, we’ll show you some of the most popular.

One of the more helpful options is `-p`, which shows the difference introduced in each commit. You can also use `-2`, which limits the output to only the last two entries:

    $ git log -p -2
    commit ca82a6dff817ec66f44342007202690a93763949
    Author: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Mon Mar 17 21:52:11 2008 -0700

        changed the version number

    diff --git a/Rakefile b/Rakefile
    index a874b73..8f94139 100644
    --- a/Rakefile
    +++ b/Rakefile
    @@ -5,7 +5,7 @@ require 'rake/gempackagetask'
     spec = Gem::Specification.new do |s|
         s.platform  =   Gem::Platform::RUBY
         s.name      =   "simplegit"
    -    s.version   =   "0.1.0"
    +    s.version   =   "0.1.1"
         s.author    =   "Scott Chacon"
         s.email     =   "schacon@gee-mail.com"
         s.summary   =   "A simple gem for using Git in Ruby code."

    commit 085bb3bcb608e1e8451d4b2432f8ecbe6306e7e7
    Author: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Sat Mar 15 16:40:33 2008 -0700

        removed unnecessary test

    diff --git a/lib/simplegit.rb b/lib/simplegit.rb
    index a0a60ae..47c6340 100644
    --- a/lib/simplegit.rb
    +++ b/lib/simplegit.rb
    @@ -18,8 +18,3 @@ class SimpleGit
         end

     end
    -
    -if $0 == __FILE__
    -  git = SimpleGit.new
    -  puts git.show
    -end
    \ No newline at end of file

This option displays the same information but with a diff directly following each entry. This is very helpful for code review or to quickly browse what happened during a series of commits that a collaborator has added. You can also use a series of summarizing options with `git log`. For example, if you want to see some abbreviated stats for each commit, you can use the `--stat` option:

    $ git log --stat
    commit ca82a6dff817ec66f44342007202690a93763949
    Author: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Mon Mar 17 21:52:11 2008 -0700

        changed the version number

     Rakefile | 2 +-
     1 file changed, 1 insertion(+), 1 deletion(-)

    commit 085bb3bcb608e1e8451d4b2432f8ecbe6306e7e7
    Author: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Sat Mar 15 16:40:33 2008 -0700

        removed unnecessary test

     lib/simplegit.rb | 5 -----
     1 file changed, 5 deletions(-)

    commit a11bef06a3f659402fe7563abf99ad00de2209e6
    Author: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Sat Mar 15 10:31:28 2008 -0700

        first commit

     README           |  6 ++++++
     Rakefile         | 23 +++++++++++++++++++++++
     lib/simplegit.rb | 25 +++++++++++++++++++++++++
     3 files changed, 54 insertions(+)

As you can see, the `--stat` option prints below each commit entry a list of modified files, how many files were changed, and how many lines in those files were added and removed. It also puts a summary of the information at the end.

Another really useful option is `--pretty`. This option changes the log output to formats other than the default. A few prebuilt options are available for you to use. The `oneline` option prints each commit on a single line, which is useful if you’re looking at a lot of commits. In addition, the `short`, `full`, and `fuller` options show the output in roughly the same format but with less or more information, respectively:

    $ git log --pretty=oneline
    ca82a6dff817ec66f44342007202690a93763949 changed the version number
    085bb3bcb608e1e8451d4b2432f8ecbe6306e7e7 removed unnecessary test
    a11bef06a3f659402fe7563abf99ad00de2209e6 first commit

The most interesting option is `format`, which allows you to specify your own log output format. This is especially useful when you’re generating output for machine parsing – because you specify the format explicitly, you know it won’t change with updates to Git:

    $ git log --pretty=format:"%h - %an, %ar : %s"
    ca82a6d - Scott Chacon, 6 years ago : changed the version number
    085bb3b - Scott Chacon, 6 years ago : removed unnecessary test
    a11bef0 - Scott Chacon, 6 years ago : first commit

Table 2-1 lists some of the more useful options that `format` takes.

Table 2-1. Useful options for `git log --pretty=format`
Option | Description of Output
--- | ---
`%H` | Commit hash
`%h` | Abbreviated commit hash
`%T` | Tree hash
`%t` | Abbreviated tree hash
`%P` | Parent hashes
`%p` | Abbreviated parent hashes
`%an` | Author name
`%ae` | Author email
`%ad` | Author date (format respects the --date=option)
`%ar` | Author date, relative
`%cn` | Committer name
`%ce` | Committer email
`%cd` | Committer date
`%cr` | Committer date, relative
`%s` | Subject

You may be wondering what the difference is between author and committer. The author is the person who originally wrote the work, whereas the committer is the person who last applied the work. So, if you send in a patch to a project and one of the core members applies the patch, both of you get credit – you as the author, and the core member as the committer. We’ll cover this distinction a bit more in Distributed Git.

The `oneline` and `format` options are particularly useful with another `log` option called `--graph`. This option adds a nice little ASCII graph showing your branch and merge history:

    $ git log --pretty=format:"%h %s" --graph
    * 2d3acf9 ignore errors from SIGCHLD on trap
    *  5e3ee11 Merge branch 'master' of git://github.com/dustin/grit
    |\
    | * 420eac9 Added a method for getting the current branch.
    * | 30e367c timeout code and tests
    * | 5a09431 add timeout protection to grit
    * | e1193f8 support for heads with slashes in them
    |/
    * d6016bc require time for xmlschema
    *  11d191e Merge branch 'defunkt' into local

This type of output will become more interesting as we go through branching and merging in the next chapter.

Those are only some simple output-formatting options to `git log` – there are many more. Table 2-2 lists the options we’ve covered so far, as well as some other common formatting options that may be useful, along with how they change the output of the log command.

Table 2-2. Common options to `git log`
Option | Description
--- | ---
`-p` | Show the patch introduced with each commit.
`--stat` | Show statistics for files modified in each commit.
`--shortstat` | Display only the changed/insertions/deletions line from the --stat command.
`--name-only` | Show the list of files modified after the commit information.
`--name-status` | Show the list of files affected with added/modified/deleted information as well.
`--abbrev-commit` | Show only the first few characters of the SHA-1 checksum instead of all 40.
`--relative-date` | Display the date in a relative format (for example, “2 weeks ago”) instead of using the full date format.
`--graph` | Display an ASCII graph of the branch and merge history beside the log output.
`--pretty` | Show commits in an alternate format. Options include oneline, short, full, fuller, and format (where you specify your own format).

## Limiting Log Output

In addition to output-formatting options, `git log` takes a number of useful limiting options – that is, options that let you show only a subset of commits. You’ve seen one such option already – the `-2` option, which show only the last two commits. In fact, you can do `-<n>`, where `n` is any integer to show the last `n` commits. In reality, you’re unlikely to use that often, because Git by default pipes all output through a pager so you see only one page of log output at a time.

However, the time-limiting options such as `--since` and `--until` are very useful. For example, this command gets the list of commits made in the last two weeks:

    $ git log --since=2.weeks

This command works with lots of formats – you can specify a specific date like `"2008-01-15"`, or a relative date such as `"2 years 1 day 3 minutes ago"`.

You can also filter the list to commits that match some search criteria. The `--author` option allows you to filter on a specific author, and the `--grep` option lets you search for keywords in the commit messages. (Note that if you want to specify both author and grep options, you have to add `--all-match` or the command will match commits with either.)

Another really helpful filter is the `-S` option which takes a string and only shows the commits that introduced a change to the code that added or removed that string. For instance, if you wanted to find the last commit that added or removed a reference to a specific function, you could call:

    $ git log -Sfunction_name

The last really useful option to pass to `git log` as a filter is a path. If you specify a directory or file name, you can limit the log output to commits that introduced a change to those files. This is always the last option and is generally preceded by double dashes (`--`) to separate the paths from the options.

In Table 2-3 we’ll list these and a few other common options for your reference.

Table 2-3. Options to limit the output of `git log`
Option | Description
--- | ---
`-(n)` | Show only the last n commits
`--since`, `--after` | Limit the commits to those made after the specified date.
`--until`, `--before` | Limit the commits to those made before the specified date.
`--author` | Only show commits in which the author entry matches the specified string.
`--committer` | Only show commits in which the committer entry matches the specified string.
`--grep` | Only show commits with a commit message containing the string
`-S` | Only show commits adding or removing code matching the string

For example, if you want to see which commits modifying test files in the Git source code history are merged and were committed by Junio Hamano in the month of October 2008, you can run something like this:

    $ git log --pretty="%h - %s" --author=gitster --since="2008-10-01" \
       --before="2008-11-01" --no-merges -- t/
    5610e3b - Fix testcase failure when extended attributes are in use
    acd3b9e - Enhance hold_lock_file_for_{update,append}() API
    f563754 - demonstrate breakage of detached checkout with symbolic link HEAD
    d1a43f2 - reset --hard/read-tree --reset -u: remove unmerged new paths
    51a94af - Fix "checkout --track -b newbranch" on detached HEAD
    b0ad11e - pull: allow "git pull origin $something:$current_branch" into an unborn branch

Of the nearly 40,000 commits in the Git source code history, this command shows the 6 that match those criteria.

# Undoing Things

At any stage, you may want to undo something. Here, we’ll review a few basic tools for undoing changes that you’ve made. Be careful, because you can’t always undo some of these undos. This is one of the few areas in Git where you may lose some work if you do it wrong.

One of the common undos takes place when you commit too early and possibly forget to add some files, or you mess up your commit message. If you want to try that commit again, you can run commit with the `--amend` option:

    $ git commit --amend

This command takes your staging area and uses it for the commit. If you’ve made no changes since your last commit (for instance, you run this command immediately after your previous commit), then your snapshot will look exactly the same, and all you’ll change is your commit message.

The same commit-message editor fires up, but it already contains the message of your previous commit. You can edit the message the same as always, but it overwrites your previous commit.

As an example, if you commit and then realize you forgot to stage the changes in a file you wanted to add to this commit, you can do something like this:

    $ git commit -m 'initial commit'
    $ git add forgotten_file
    $ git commit --amend

You end up with a single commit – the second commit replaces the results of the first.

## Unstaging a Staged File

The next two sections demonstrate how to wrangle your staging area and working directory changes. The nice part is that the command you use to determine the state of those two areas also reminds you how to undo changes to them. For example, let’s say you’ve changed two files and want to commit them as two separate changes, but you accidentally type `git add *` and stage them both. How can you unstage one of the two? The `git status` command reminds you:

    $ git add *
    $ git status
    On branch master
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        renamed:    README.md -&gt; README
        modified:   CONTRIBUTING.md

Right below the “Changes to be committed” text, it says use `git reset HEAD <file>...` to unstage. So, let’s use that advice to unstage the `CONTRIBUTING.md` file:

    $ git reset HEAD CONTRIBUTING.md
    Unstaged changes after reset:
    M	CONTRIBUTING.md
    $ git status
    On branch master
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        renamed:    README.md -&gt; README

    Changes not staged for commit:
      (use "git add &lt;file&gt;..." to update what will be committed)
      (use "git checkout -- &lt;file&gt;..." to discard changes in working directory)

        modified:   CONTRIBUTING.md

The command is a bit strange, but it works. The `CONTRIBUTING.md` file is modified but once again unstaged.

###### Note

While `git reset` can be a dangerous command if you call it with `--hard`, in this instance the file in your working directory is not touched. Calling `git reset` without an option is not dangerous - it only touches your staging area.

For now this magic invocation is all you need to know about the `git reset` command. We’ll go into much more detail about what `reset` does and how to master it to do really interesting things in Reset Demystified.

## Unmodifying a Modified File

What if you realize that you don’t want to keep your changes to the `CONTRIBUTING.md` file? How can you easily unmodify it – revert it back to what it looked like when you last committed (or initially cloned, or however you got it into your working directory)? Luckily, `git status` tells you how to do that, too. In the last example output, the unstaged area looks like this:

    Changes not staged for commit:
      (use "git add &lt;file&gt;..." to update what will be committed)
      (use "git checkout -- &lt;file&gt;..." to discard changes in working directory)

        modified:   CONTRIBUTING.md

It tells you pretty explicitly how to discard the changes you’ve made. Let’s do what it says:

    $ git checkout -- CONTRIBUTING.md
    $ git status
    On branch master
    Changes to be committed:
      (use "git reset HEAD &lt;file&gt;..." to unstage)

        renamed:    README.md -&gt; README

You can see that the changes have been reverted.

###### Important

It’s important to understand that `git checkout -- <file>` is a dangerous command. Any changes you made to that file are gone – Git just copied another file over it. Don’t ever use this command unless you absolutely know that you don’t want the file.

If you would like to keep the changes you’ve made to that file but still need to get it out of the way for now, we’ll go over stashing and branching in Git Branching; these are generally better ways to go.

Remember, anything that is committed in Git can almost always be recovered. Even commits that were on branches that were deleted or commits that were overwritten with an `--amend` commit can be recovered (see Data Recovery for data recovery). However, anything you lose that was never committed is likely never to be seen again.

# Working with Remotes

To be able to collaborate on any Git project, you need to know how to manage your remote repositories. Remote repositories are versions of your project that are hosted on the Internet or network somewhere. You can have several of them, each of which generally is either read-only or read/write for you. Collaborating with others involves managing these remote repositories and pushing and pulling data to and from them when you need to share work. Managing remote repositories includes knowing how to add remote repositories, remove remotes that are no longer valid, manage various remote branches and define them as being tracked or not, and more. In this section, we’ll cover some of these remote-management skills.

## Showing Your Remotes

To see which remote servers you have configured, you can run the `git remote` command. It lists the shortnames of each remote handle you’ve specified. If you’ve cloned your repository, you should at least see origin – that is the default name Git gives to the server you cloned from:

    $ git clone https://github.com/schacon/ticgit
    Cloning into 'ticgit'...
    remote: Reusing existing pack: 1857, done.
    remote: Total 1857 (delta 0), reused 0 (delta 0)
    Receiving objects: 100% (1857/1857), 374.35 KiB | 268.00 KiB/s, done.
    Resolving deltas: 100% (772/772), done.
    Checking connectivity... done.
    $ cd ticgit
    $ git remote
    origin

You can also specify `-v`, which shows you the URLs that Git has stored for the shortname to be used when reading and writing to that remote:

    $ git remote -v
    origin	https://github.com/schacon/ticgit (fetch)
    origin	https://github.com/schacon/ticgit (push)

If you have more than one remote, the command lists them all. For example, a repository with multiple remotes for working with several collaborators might look something like this.

    $ cd grit
    $ git remote -v
    bakkdoor  https://github.com/bakkdoor/grit (fetch)
    bakkdoor  https://github.com/bakkdoor/grit (push)
    cho45     https://github.com/cho45/grit (fetch)
    cho45     https://github.com/cho45/grit (push)
    defunkt   https://github.com/defunkt/grit (fetch)
    defunkt   https://github.com/defunkt/grit (push)
    koke      git://github.com/koke/grit.git (fetch)
    koke      git://github.com/koke/grit.git (push)
    origin    git@github.com:mojombo/grit.git (fetch)
    origin    git@github.com:mojombo/grit.git (push)

This means we can pull contributions from any of these users pretty easily. We may additionally have permission to push to one or more of these, though we can’t tell that here.

Notice that these remotes use a variety of protocols; we’ll cover more about this in Getting Git on a Server.

## Adding Remote Repositories

We’ve mentioned and given some demonstrations of how the clone command implicitly adds the `origin` remote for you. Here’s how to add a new remote explicitly. To add a new remote Git repository as a shortname you can reference easily, run `git remote add <shortname> <url>`:

    $ git remote
    origin
    $ git remote add pb https://github.com/paulboone/ticgit
    $ git remote -v
    origin	https://github.com/schacon/ticgit (fetch)
    origin	https://github.com/schacon/ticgit (push)
    pb	https://github.com/paulboone/ticgit (fetch)
    pb	https://github.com/paulboone/ticgit (push)

Now you can use the string `pb` on the command line in lieu of the whole URL. For example, if you want to fetch all the information that Paul has but that you don’t yet have in your repository, you can run `git fetch pb`:

    $ git fetch pb
    remote: Counting objects: 43, done.
    remote: Compressing objects: 100% (36/36), done.
    remote: Total 43 (delta 10), reused 31 (delta 5)
    Unpacking objects: 100% (43/43), done.
    From https://github.com/paulboone/ticgit
     * [new branch]      master     -&gt; pb/master
     * [new branch]      ticgit     -&gt; pb/ticgit

Paul’s master branch is now accessible locally as `pb/master` – you can merge it into one of your branches, or you can check out a local branch at that point if you want to inspect it. (We’ll go over what branches are and how to use them in much more detail in Git Branching.)

## Fetching and Pulling from Your Remotes

As you just saw, to get data from your remote projects, you can run:

    $ git fetch [remote-name]

The command goes out to that remote project and pulls down all the data from that remote project that you don’t have yet. After you do this, you should have references to all the branches from that remote, which you can merge in or inspect at any time.

If you clone a repository, the command automatically adds that remote repository under the name “origin”. So, `git fetch origin` fetches any new work that has been pushed to that server since you cloned (or last fetched from) it. It’s important to note that the `git fetch` command only downloads the data to your local repository – it doesn’t automatically merge it with any of your work or modify what you’re currently working on. You have to merge it manually into your work when you’re ready.

If your current branch is set up to track a remote branch (see the next section and Git Branching for more information), you can use the `git pull` command to automatically fetch and then merge that remote branch into your current branch. This may be an easier or more comfortable workflow for you; and by default, the `git clone` command automatically sets up your local master branch to track the remote master branch (or whatever the default branch is called) on the server you cloned from. Running `git pull` generally fetches data from the server you originally cloned from and automatically tries to merge it into the code you’re currently working on.

## Pushing to Your Remotes

When you have your project at a point that you want to share, you have to push it upstream. The command for this is simple: `git push [remote-name] [branch-name]`. If you want to push your master branch to your `origin` server (again, cloning generally sets up both of those names for you automatically), then you can run this to push any commits you’ve done back up to the server:

    $ git push origin master

This command works only if you cloned from a server to which you have write access and if nobody has pushed in the meantime. If you and someone else clone at the same time and they push upstream and then you push upstream, your push will rightly be rejected. You’ll have to fetch their work first and incorporate it into yours before you’ll be allowed to push. See Git Branching for more detailed information on how to push to remote servers.

## Inspecting a Remote

If you want to see more information about a particular remote, you can use the `git remote show [remote-name]` command. If you run this command with a particular shortname, such as `origin`, you get something like this:

    $ git remote show origin
    * remote origin
      Fetch URL: https://github.com/schacon/ticgit
      Push  URL: https://github.com/schacon/ticgit
      HEAD branch: master
      Remote branches:
        master                               tracked
        dev-branch                           tracked
      Local branch configured for 'git pull':
        master merges with remote master
      Local ref configured for 'git push':
        master pushes to master (up to date)

It lists the URL for the remote repository as well as the tracking branch information. The command helpfully tells you that if you’re on the master branch and you run `git pull`, it will automatically merge in the master branch on the remote after it fetches all the remote references. It also lists all the remote references it has pulled down.

That is a simple example you’re likely to encounter. When you’re using Git more heavily, however, you may see much more information from `git remote show`:

    $ git remote show origin
    * remote origin
      URL: https://github.com/my-org/complex-project
      Fetch URL: https://github.com/my-org/complex-project
      Push  URL: https://github.com/my-org/complex-project
      HEAD branch: master
      Remote branches:
        master                           tracked
        dev-branch                       tracked
        markdown-strip                   tracked
        issue-43                         new (next fetch will store in remotes/origin)
        issue-45                         new (next fetch will store in remotes/origin)
        refs/remotes/origin/issue-11     stale (use 'git remote prune' to remove)
      Local branches configured for 'git pull':
        dev-branch merges with remote dev-branch
        master     merges with remote master
      Local refs configured for 'git push':
        dev-branch                     pushes to dev-branch                     (up to date)
        markdown-strip                 pushes to markdown-strip                 (up to date)
        master                         pushes to master                         (up to date)

This command shows which branch is automatically pushed to when you run `git push` while on certain branches. It also shows you which remote branches on the server you don’t yet have, which remote branches you have that have been removed from the server, and multiple local branches that are able to merge automatically with their remote-tracking branch when you run `git pull`.

## Removing and Renaming Remotes

You can run `git remote rename` to change a remote’s shortname. For instance, if you want to rename `pb` to `paul`, you can do so with `git remote rename`:

    $ git remote rename pb paul
    $ git remote
    origin
    paul

It’s worth mentioning that this changes all your remote-tracking branch names, too. What used to be referenced at `pb/master` is now at `paul/master`.

If you want to remove a remote for some reason – you’ve moved the server or are no longer using a particular mirror, or perhaps a contributor isn’t contributing anymore – you can use `git remote rm`:

    $ git remote rm paul
    $ git remote
    origin

# Tagging

Like most VCSs, Git has the ability to tag specific points in history as being important. Typically people use this functionality to mark release points (v1.0, and so on). In this section, you’ll learn how to list the available tags, how to create new tags, and what the different types of tags are.

## Listing Your Tags

Listing the available tags in Git is straightforward. Just type `git tag`:

    $ git tag
    v0.1
    v1.3

This command lists the tags in alphabetical order; the order in which they appear has no real importance.

You can also search for tags with a particular pattern. The Git source repo, for instance, contains more than 500 tags. If you’re only interested in looking at the 1.8.5 series, you can run this:

    $ git tag -l "v1.8.5*"
    v1.8.5
    v1.8.5-rc0
    v1.8.5-rc1
    v1.8.5-rc2
    v1.8.5-rc3
    v1.8.5.1
    v1.8.5.2
    v1.8.5.3
    v1.8.5.4
    v1.8.5.5

## Creating Tags

Git uses two main types of tags: lightweight and annotated.

A lightweight tag is very much like a branch that doesn’t change – it’s just a pointer to a specific commit.

Annotated tags, however, are stored as full objects in the Git database. They’re checksummed; contain the tagger name, email, and date; have a tagging message; and can be signed and verified with GNU Privacy Guard (GPG). It’s generally recommended that you create annotated tags so you can have all this information; but if you want a temporary tag or for some reason don’t want to keep the other information, lightweight tags are available too.

## Annotated Tags

Creating an annotated tag in Git is simple. The easiest way is to specify `-a` when you run the `tag` command:

    $ git tag -a v1.4 -m "my version 1.4"
    $ git tag
    v0.1
    v1.3
    v1.4

The `-m` specifies a tagging message, which is stored with the tag. If you don’t specify a message for an annotated tag, Git launches your editor so you can type it in.

You can see the tag data along with the commit that was tagged by using the `git show` command:

    $ git show v1.4
    tag v1.4
    Tagger: Ben Straub &lt;ben@straub.cc&gt;
    Date:   Sat May 3 20:19:12 2014 -0700

    my version 1.4

    commit ca82a6dff817ec66f44342007202690a93763949
    Author: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Mon Mar 17 21:52:11 2008 -0700

        changed the version number

That shows the tagger information, the date the commit was tagged, and the annotation message before showing the commit information.

## Lightweight Tags

Another way to tag commits is with a lightweight tag. This is basically the commit checksum stored in a file – no other information is kept. To create a lightweight tag, don’t supply the `-a`, `-s`, or `-m` option:

    $ git tag v1.4-lw
    $ git tag
    v0.1
    v1.3
    v1.4
    v1.4-lw
    v1.5

This time, if you run `git show` on the tag, you don’t see the extra tag information. The command just shows the commit:

    $ git show v1.4-lw
    commit ca82a6dff817ec66f44342007202690a93763949
    Author: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Mon Mar 17 21:52:11 2008 -0700

        changed the version number

## Tagging Later

You can also tag commits after you’ve moved past them. Suppose your commit history looks like this:

    $ git log --pretty=oneline
    15027957951b64cf874c3557a0f3547bd83b3ff6 Merge branch 'experiment'
    a6b4c97498bd301d84096da251c98a07c7723e65 beginning write support
    0d52aaab4479697da7686c15f77a3d64d9165190 one more thing
    6d52a271eda8725415634dd79daabbc4d9b6008e Merge branch 'experiment'
    0b7434d86859cc7b8c3d5e1dddfed66ff742fcbc added a commit function
    4682c3261057305bdd616e23b64b0857d832627b added a todo file
    166ae0c4d3f420721acbb115cc33848dfcc2121a started write support
    9fceb02d0ae598e95dc970b74767f19372d61af8 updated rakefile
    964f16d36dfccde844893cac5b347e7b3d44abbc commit the todo
    8a5cbc430f1a9c3d00faaeffd07798508422908a updated readme

Now, suppose you forgot to tag the project at v1.2, which was at the “updated rakefile” commit. You can add it after the fact. To tag that commit, you specify the commit checksum (or part of it) at the end of the command:

    $ git tag -a v1.2 9fceb02

You can see that you’ve tagged the commit:

    $ git tag
    v0.1
    v1.2
    v1.3
    v1.4
    v1.4-lw
    v1.5

    $ git show v1.2
    tag v1.2
    Tagger: Scott Chacon &lt;schacon@gee-mail.com&gt;
    Date:   Mon Feb 9 15:32:16 2009 -0800

    version 1.2
    commit 9fceb02d0ae598e95dc970b74767f19372d61af8
    Author: Magnus Chacon &lt;mchacon@gee-mail.com&gt;
    Date:   Sun Apr 27 20:43:35 2008 -0700

        updated rakefile
    ...

## Sharing Tags

By default, the `git push` command doesn’t transfer tags to remote servers. You will have to explicitly push tags to a shared server after you have created them. This process is just like sharing remote branches – you can run `git push origin [tagname]`.

    $ git push origin v1.5
    Counting objects: 14, done.
    Delta compression using up to 8 threads.
    Compressing objects: 100% (12/12), done.
    Writing objects: 100% (14/14), 2.05 KiB | 0 bytes/s, done.
    Total 14 (delta 3), reused 0 (delta 0)
    To git@github.com:schacon/simplegit.git
     * [new tag]         v1.5 -&gt; v1.5

If you have a lot of tags that you want to push up at once, you can also use the `--tags` option to the `git push` command. This will transfer all of your tags to the remote server that are not already there.

    $ git push origin --tags
    Counting objects: 1, done.
    Writing objects: 100% (1/1), 160 bytes | 0 bytes/s, done.
    Total 1 (delta 0), reused 0 (delta 0)
    To git@github.com:schacon/simplegit.git
     * [new tag]         v1.4 -&gt; v1.4
     * [new tag]         v1.4-lw -&gt; v1.4-lw

Now, when someone else clones or pulls from your repository, they will get all your tags as well.

## Checking out Tags

You can’t really check out a tag in Git, since they can’t be moved around. If you want to put a version of your repository in your working directory that looks like a specific tag, you can create a new branch at a specific tag with `git checkout -b [branchname] [tagname]`:

    $ git checkout -b version2 v2.0.0
    Switched to a new branch 'version2'

Of course if you do this and do a commit, your `version2` branch will be slightly different than your `v2.0.0` tag since it will move forward with your new changes, so do be careful.

# Git Aliases

Before we finish this chapter on basic Git, there’s just one little tip that can make your Git experience simpler, easier, and more familiar: aliases. We won’t refer to them or assume you’ve used them later in the book, but you should probably know how to use them.

Git doesn’t automatically infer your command if you type it in partially. If you don’t want to type the entire text of each of the Git commands, you can easily set up an alias for each command using `git config`. Here are a couple of examples you may want to set up:

    $ git config --global alias.co checkout
    $ git config --global alias.br branch
    $ git config --global alias.ci commit
    $ git config --global alias.st status

This means that, for example, instead of typing `git commit`, you just need to type `git ci`. As you go on using Git, you’ll probably use other commands frequently as well; don’t hesitate to create new aliases.

This technique can also be very useful in creating commands that you think should exist. For example, to correct the usability problem you encountered with unstaging a file, you can add your own unstage alias to Git:

    $ git config --global alias.unstage 'reset HEAD --'

This makes the following two commands equivalent:

    $ git unstage fileA
    $ git reset HEAD -- fileA

This seems a bit clearer. It’s also common to add a `last` command, like this:

    $ git config --global alias.last 'log -1 HEAD'

This way, you can see the last commit easily:

    $ git last
    commit 66938dae3329c7aebe598c2246a8e6af90d04646
    Author: Josh Goebel &lt;dreamer3@example.com&gt;
    Date:   Tue Aug 26 19:48:51 2008 +0800

        test for current head

        Signed-off-by: Scott Chacon &lt;schacon@example.com&gt;

As you can tell, Git simply replaces the new command with whatever you alias it for. However, maybe you want to run an external command, rather than a Git subcommand. In that case, you start the command with a `!` character. This is useful if you write your own tools that work with a Git repository. We can demonstrate by aliasing `git visual` to run `gitk`:

    $ git config --global alias.visual '!gitk'

# Summary

At this point, you can do all the basic local Git operations – creating or cloning a repository, making changes, staging and committing those changes, and viewing the history of all the changes the repository has been through. Next, we’ll cover Git’s killer feature: its branching model.