MoinMaster:

- InstallDocs

# About MoinMoin

MoinMoin is a full-featured wiki engine.

For a more detailed description, please see the MoinMoin Homepage and the HowTos.

Skip to:

- Installation Requirements

- Quick Installation (easy, no admin knowledge required)

- Server Installation (admin knowledge required)

# Installation Requirements

Before you start installing MoinMoin, some requirements have to be met. The actual requirements depend largely on what kind of setup you plan for your wiki installation.

## What do you need to know?

There are two major ways of using MoinMoin, requiring different knowledge about the environment it is going to be installed in (e.g. operating system, server software, etc.):

- Quick installation:
  - A likely scenario for use on a personal computer or laptop
  - No knowledge about administration of servers is required, but
  - You should be familiar with your chosen operating system
- Server installation:
  - General server administration knowledge is required
  - You have to know about web server configuration
  - You have to know about permissions, users, groups and the like

Please note, that there are service providers who offer hosted, pre-configured MoinMoin installations. Also, in case you need MoinMoin on your own server, please see the Support Options about how to get help with installation/configuration.

## What software do you need to have installed?

The software that has to be installed on the target machine, also largely depends on the type of deployment AND on the features you want to make use of. While the largest amount of functionality in MoinMoin works with a minimal set of requirements, some features can only be activated in the presence of additional software:

### Required software

For details, see docs/REQUIREMENTS in your moin download archive.

# Quick Installation: The 1 minute MoinMoin install

1. Unpack the MoinMoin release archive (get it from MoinMoinDownload).

2. Run wikiserver.py from the top level directory.

3. Read and follow this page in your wiki: http://localhost:8080/LanguageSetup

4. You are done! Have fun!

If these steps were not verbose enough for you, you can try one of these more detailed instructions:

- Skip to Linux

- Skip to Mac OS X

- Skip to Windows

# Linux: Detailed Quick Installation

## Download MoinMoin

Please read the MoinMoinDownload wiki page to find and download the latest MoinMoin release version.

Please remember the path where you saved that download and also its exact filename.

The filename will likely be something like `moin-1.9.0.tar.gz` (for moin version 1.9.0), but we will just talk of moin-x.x.x because the concrete version number changes often. You have to use the real version number in the commands you enter, not x.x.x, of course.

## Working on the shell

For the next steps, we will work on a shell prompt (for sure you can also do all the steps using some GUI tool of your favourite desktop environment, but because of the diversity of those environments, you will have to find out the right tools yourself using these steps as a guideline).

If you use some graphical desktop environment or some X Window Manager, you will first have to find a terminal window (usually called "Terminal", "XTerm", "shell", "bash", "Command line window" or similar) and start it. If you see something showing a $ and a blinking cursor to the right of it, it worked. We shall also refer to this window as the "shell".

Note that you must not use a "root shell" for this type of installation. Just use a shell as the non-priviledged user you usually log in as. You can use the `id` command to display what user you are and it must not display "root".

For the next steps, we assume you have downloaded the moin archive into your home directory and that the current directory is your home directory (that's the default when you start a shell, usually indicated by a shell prompt showing `~$` - the tilde means you are in your home directory and the dollar means that you can enter a command to the right of it).

## Verify the integrity of your downloaded file

Make sure the archive downloaded correctly by verifying the md5sum (a checksum) of the archive:

    $ md5sum moin-x.x.x.tar.gz
    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX  moin-x.x.x.tar.gz

The value (XXX...) md5sum shown left of the filename must match the value published on the download page for the file you just downloaded!

If it does not match, your download is corrupted somehow. Remove the file and try downloading it again.

Alternatively, you can also use the `sha256sum` command and the sha256sum shown on the download page.

Even better is to use `GnuPG` to verify the authenticity of the file (you will need to additionally download the corresponding file with the `.asc` extension, which is the signature for the release file):

    # first fetch the key (and subkeys) that were used to sign the release archive:
    $ gpg --keyserver keys.gnupg.net --recv-key FAF7B393
    gpg: requesting key FAF7B393 from hkp server keys.gnupg.net
    gpg: key FAF7B393: public key "Thomas Waldmann <tw@waldmann-edv.de>" imported
    gpg: no ultimately trusted keys found
    gpg: Total number processed: 1
    gpg:               imported: 1  (RSA: 1)

    # now check the signature:
    $ gpg --verify moin-1.9.7.tar.gz.asc moin-1.9.7.tar.gz
    gpg: Signature made Sat 16 Mar 2013 05:42:00 PM UTC using RSA key ID 31A6CB60
    gpg: Good signature from "Thomas Waldmann <tw@waldmann-edv.de>"                 <--- check this!
    gpg:                 aka "Thomas Waldmann <tw-public@gmx.de>"
    gpg: WARNING: This key is not certified with a trusted signature!               <--- Normal if TW is not part of your web-of-trust.
    gpg:          There is no indication that the signature belongs to the owner.
    Primary key fingerprint: 6D5B EF9A DD20 7580 5747  B70F 9F88 FB52 FAF7 B393
         Subkey fingerprint: 9FCB 53A2 E7DA 4C08 8568  C3FA 90A8 7636 31A6 CB60

## Unpack MoinMoin

We use a gzipped tar archive for our release archives - you need to unpack it before using.

Unpack it using this command on the shell:

    $ tar xvzf moin-x.x.x.tar.gz
    (it will show a long list of all files it has unpacked)

This will create a directory `moin-x.x.x` in the current directory with all the MoinMoin release files in it.

## Run MoinMoin

MoinMoin is written using the Python programming language so you need to start it using the python interpreter:

    $ cd moin-x.x.x
    $ python wikiserver.py
    (you will see the log output of the running MoinMoin server here)

After MoinMoin has started, it will show some log output in your terminal window. Within that logging output, it will also announce on which IP address and port the server runs (e.g. http://127.0.0.1:8080).

Now just leave that terminal window as it is and the builtin web server of MoinMoin will work as long as you don't stop it.

You can stop the server by closing that terminal window or by pressing `Ctrl-C` to interrupt it.

## Use MoinMoin

Just point your web browser at the address you got from the terminal window (e.g.: http://127.0.0.1:8080/ or http://localhost:8080/ ).

You should now see your fresh moin wiki in your browser. Maybe bookmark that address so you don't have to enter it manually each time you want to use your wiki.

Your wiki is now ready to use. Have fun!

# Mac: Detailed Quick Installation

Apple's Mac operating system comes with Python already installed as a part of the core system software making running a MoinMoin wiki very easy.

## Download MoinMoin

1. Download the latest Moin from MoinMoinDownload page.

2. Double-click to expand.

## Starting Moin for the first time

By default, python scripts (.py) will open in TextEdit.app. For convenience, we'll want to associate .py files to open in Terminal.app so that we can simply double-click the `wikiserver.py` file to run Moin.

1. Right-click (control-click) on the `wikiserver.py` file.

2. From the contextual-menu,

   1. Select "Open with..." > "Other...";

   2. From the file dialog, select "All Applications", check "Always Open With", then navigate to Terminal.app (located in //Applications/Utilites/).
      (The "Always open with" sets Terminal.app as the default application so in future you can double-click the `wikiserver.py` file).

## Daily Use

1. Double-click on the wikiserver.py file and Terminal.app will launch.

2. Point your browser at http://localhost:8080

3. To quit the wiki, simply close the terminal window.

# Windows: Detailed Quick Installation

MoinMoin relies on Python which requires a separate install on Windows.

## Download & Install Python

- Go to http://www.python.org/download/ and download the Python installer.

- Run the installer!
  - If you want to save some space, you can unselect all but the first two options (you won't need the 'Test Suite', 'Utility Scripts', or 'Documentation' unless you plan to develop in Python).
  - The installer will automatically associate .py files with Python.

## Download & Expand MoinMoin

1. Download the latest MoinMoin from the MoinMoinDownload page.

2. Extract the files to a folder (using a utility such as 7-zip or similar).

3. Simply double-click `wikiserver.py` which you will find in this folder.

## Daily Use

1. Double-click on the `wikiserver.py` file and a black command window will open.

2. Point your browser to http://localhost:8080/.

3. To quit the wiki, simply close the command window.

# Server Installation

How to setup MoinMoin for various web servers / gateway interfaces.

Please note that you require server admin experience for a server installation. It is not in the scope of this documentation to teach you (web) server configuration/administration, but just to show you how MoinMoin is installed. If you are unsure about your experience level, please try the Quick Installation first.

## MoinMoin and WSGI

MoinMoin is a WSGI application, therefore the best environment to run a MoinMoin instance in is a WSGI-aware one.

Here are some of them:

- Apache with mod_wsgi: This is the recommended deployment when using Apache. It is very fast and easy to setup.

- standalone server shipped with MoinMoin: reasonably fast, also used for the Quick Installation

- More WSGI server options can be found there: http://wiki.python.org/moin/WSGIImplementations

Also we will cover some legacy deployment methods for serving MoinMoin from non-WSGI-aware setups. The needed adapters are included in the MoinMoin distribution.

- CGI: the classic protocol for web application serving - awfully slow but works (almost) everywhere.

- FastCGI / SCGI / AJP: fast, and in the case of FastCGI, quite widespread.

## Apache with mod_wsgi

The details of how to install mod_wsgi or Apache is out of scope of this document. Please follow the install instructions for each respective software package. The Apache documentation is here, and the mod_wsgi instructions has set-up details. Some users have documented their install process in detail on the user-supported how-to page on the MoinMoin wiki.

If everything has been configured to your liking, you can test your setup with the application contained in `test.wsgi` (please read the hints included in the file).

Some further hints for usage of mod_wsgi:

- If possible, use mod_wsgi's daemon mode (not the embedded mode). This can prove more secure since it seperates the WSGI apps from the actual Apache process.

- If you use Windows, there is no daemon mode, thus you have no other choice than to use embedded mode.

## MoinMoin specific installation

### MoinMoin installation

You may, but do not need to, install MoinMoin to system specific locations via the use of `setup.py`.

You can place the MoinMoin package (a directory called `MoinMoin/` containing most of the code) anywhere you like, no specific location in the filesystem is required.

If you choose to use `setup.py`, you can install MoinMoin using:

    python setup.py install --force --record=install.log --prefix='/usr/local' --install-data=/srv
    # or alternatively, to the default system location:
    python setup.py install --force --record=install.log
    # --force is important, without it setup.py might not overwrite outdated files at the destination

With `--install-data=/path` you could change the prefix of the wiki instance directory (`share/moin`) to `/path`.

Please note that using `setup.py` as shown above will overwrite all files at the destination. So if you modified files there, your modifications will be lost. However it won't remove outdated files there so if you had used `setup.py` before for the same destination, maybe clean up at the destination before installing a new moin version.

If you need to modify files, do not do so in their original location, but copy them to some safe place first and then edit them there.

The file `install.log` will contain a complete log of installed files.

You may want to keep it in case you have trouble locating some of the file(s) mentioned below.

### Python path setup

Code: From here on we will use `/moin/code` to refer to the parent directory of the `MoinMoin/` package directory.

Config: You can place the wiki config files (they are just Python code) anywhere you like, no specific location is required. We will use `/moin/config` to refer to the directory that contains your wiki config files.

To make MoinMoin and Python find the needed files, you need to make those locations known:

- Python needs to be able to find the `MoinMoin` code package - this is needed so that `from MoinMoin import ...` can work. ( This is not needed if you choose to do a system-wide installation.)

- Python needs to be able to find the wiki configuration files so that MoinMoin is able to import them.

For this to work, you can simply edit `moin.wsgi` (or in case you deploy with CGI/FCGI/etc.: the corresponding script for these deployment methods from the `wiki/server/` directory). There is already example code in those files, just remove the comment (# hash character) and change them accordingly:

    sys.path.insert(0, '/moin/code')
    sys.path.insert(0, '/moin/config')

You can place `moin.wsgi` anywhere you like. Just make your web server find and use it.

### MoinMoin wiki configuration

Although the code is now ready to run, your wiki is not configured yet.

You now have to create your wiki configuration within the `/moin/config/` directory.

#### Single wiki

Just copy the file `wiki/config/wikiconfig.py` from the distribution archive to `/moin/config/`.

The file is thoroughly commented to ease you through the configuration. Make sure that if you configure paths in the file, that those paths are absolute paths. This way you ensure that the needed files are definitely found and save yourself some troubles. The essential configuration directives are:

- `data_dir`: this should point to where the particular data of your wiki should be stored. (see below)

- `data_underlay_dir`: MoinMoin comes with (pre-made) system and help pages. This directive should point to the directory where you put those (see below)

- `interwikiname`: This should be a short descriptive identifier for your wiki. It needs to be unique and should never be changed later

- `sitename`: This will be the name of your wiki for display purposes

We don't require any specific file system locations, but please be careful: `data_dir` contains sensitive informations that must not be read by anything or anyone except the running moin wiki code. For example, you must not make `data_dir` accessible directly via the web server, thus you must not copy it to a directory below document root of your web server. Any other permanent storage location on a fast local filesystem will be fine.

You need to copy the complete contents of the `wiki/data/` directory we provide in the distribution archive to the location you specified as `data_dir`. The same goes for `wiki/underlay/` and the location you specified as `data_underlay_dir`.

#### Multiple wikis

Just copy the files `wiki/config/wikifarm/*` from the dist archive to `/moin/config/`.

Now follow the directions as for a single wiki (see above) for each of your farm wikis.

Special wiki farm hints:

- You need a separate `data_dir` and `data_underlay_dir` per wiki

- If you want to share some settings for your wikis, put them into `farmconfig.py` - they will be inherited by `mywiki`

- The settings that need to be different are put into `mywiki.py`

- If you need more than 1 wiki, add files like `mywiki.py` and reference them from `farmconfig.py` as you see for `mywiki`

#### Static file serving

MoinMoin also comes with some static files like images, CSS, Javascript, Java applet files, etc. (see the `MoinMoin/web/static/htdocs/` directory in the distribution archive). They are needed for things like styling, icons and additional client-side functionality.

MoinMoin serves those files by a built-in static file server at the path '../MoinMoin/web/static/htdocsZ' (XYZ like in MoinMoin version X.Y.Z, e.g. `../MoinMoin/web/static/htdocs0` for moin 1.9.0).

Please note that this path is relative to the script root, so:

- if you run your wiki script at `/mywiki`, the URL for the static files server will be `/mywiki../MoinMoin/web/static/htdocsZ`. You need to configure `url_prefix_static` in your wiki config to match this.

- if you run your wiki script at `/`, the URL for the static files server will be `../MoinMoin/web/static/htdocsZ` - and it will automagically match the default value of `url_prefix_static`, so no need to configure it.

### Running MoinMoin with Apache / mod_wsgi

Now you should be able to simply run the `moin.wsgi` script the same way you ran `test.wsgi` above.

### Running MoinMoin with other WSGI servers

Have a look at `moin.wsgi` and the documentation of your web server's WSGI support. As WSGI is a standard, it should be quite similar and easy to adapt.

### Running MoinMoin with CGI, FastCGI, SCGI or AJP

If you are not running a WSGI capable server and want to deploy MoinMoin with one of the other methods (like CGI, FastCGI, SCGI or AJP), just use the appropriate script for the desired method from `wiki/server/` (instead of `moin.wsgi`):

- `moin.cgi`: serves both CGI and FastCGI requests.

- `moin.scgi`: serves SCGI capable servers

- `moin.ajp`: serves AJP capable servers

Now edit that script (similarly as shown above for `moin.wsgi`) to make Python find the moin code and wiki configuration files.

For setting up your particular web server to speak any of these protocols to the moin application, please refer to the web server's documentation.

When using the scripts for FastCGI, SCGI or AJP (not CGI), be aware that they can also act as externally spawned processes to the web server. Via the means of commandline parameters they can be bound to an interface or UNIX socket and also do threading or forking for performance.

Try running `moin.cgi --help` for an example. When run without any options by the web server, control of sockets and the like is left to the web server.

Note: The non-WSGI deployment scripts use flup to convert FastCGI/SCGI/AJP/CGI to WSGI (we bundle flup with moin). Please see the flup documentation for more details.

### Running MoinMoin with anything else

In the unlikely case none of the above deployment methods work for you, you can try to:

- find some WSGI module for anything, or some anything-to-WSGI middleware

- use it to run the moin WSGI application

Alternatively, you can also run moin with any of the supported methods (on some other IP or some other port) and use your (unsupported) main web server as a proxy.

### Testing your setup

You can test if everything works by following these steps:

- Access the URL you have configured for your wiki and you should see something that looks similar to the MoinMoin homepage.

- Go to the WikiSandBox page in your wiki.

- Try to edit it and save your changes.

- If that works, see if your edit is shown on the RecentChanges page.

- If you see it, congratulations, your new wiki works!

## Troubleshooting

When things go wrong and reading the docs does not help, just:

- ask concrete questions on the MoinMoinChat

- and wait until someone answers

MoinMaster: InstallDocs (last edited 2009-09-15 17:15:09 by RickVanderveer)