WCSLIB: wcsprm Struct Reference

WCSLIB 5.19.1

Data Fields
wcsprm Struct Reference

Coordinate transformation parameters. More...

`#include <wcs.h>`

## Data Fields
int | flag
int | naxis
double * | crpix
double * | pc
double * | cdelt
double * | crval
char(* | cunit )[72]
char(* | ctype )[72]
double | lonpole
double | latpole
double | restfrq
double | restwav
int | npv
int | npvmax
struct pvcard * | pv
int | nps
int | npsmax
struct pscard * | ps
double * | cd
double * | crota
int | altlin
int | velref
char | alt [4]
int | colnum
int * | colax
char(* | cname )[72]
double * | crder
double * | csyer
char | dateavg [72]
char | dateobs [72]
double | equinox
double | mjdavg
double | mjdobs
double | obsgeo [3]
char | radesys [72]
char | specsys [72]
char | ssysobs [72]
double | velosys
double | zsource
char | ssyssrc [72]
double | velangl
char | wcsname [72]
int | ntab
int | nwtb
struct tabprm * | tab
struct wtbarr * | wtb
char | lngtyp [8]
char | lattyp [8]
int | lng
int | lat
int | spec
int | cubeface
int * | types
void * | padding
struct linprm | lin
struct celprm | cel
struct spcprm | spc
struct wcserr * | err
void * | m_padding
int | m_flag
int | m_naxis
double * | m_crpix
double * | m_pc
double * | m_cdelt
double * | m_crval
char(* | m_cunit )[72]
char((* | m_ctype )[72]
struct pvcard * | m_pv
struct pscard * | m_ps
double * | m_cd
double * | m_crota
int * | m_colax
char(* | m_cname )[72]
double * | m_crder
double * | m_csyer
struct tabprm * | m_tab
struct wtbarr * | m_wtb

## Detailed Description

The wcsprm struct contains information required to transform world coordinates. It consists of certain members that must be set by the user (given) and others that are set by the WCSLIB routines (returned). While the addresses of the arrays themselves may be set by wcsinit() if it (optionally) allocates memory, their contents must be set by the user.

Some parameters that are given are not actually required for transforming coordinates. These are described as "auxiliary"; the struct simply provides a place to store them, though they may be used by wcshdo() in constructing a FITS header from a wcsprm struct. Some of the returned values are supplied for informational purposes and others are for internal use only as indicated.

In practice, it is expected that a WCS parser would scan the FITS header to determine the number of coordinate axes. It would then use wcsinit() to allocate memory for arrays in the wcsprm struct and set default values. Then as it reread the header and identified each WCS keyrecord it would load the value into the relevant wcsprm array element. This is essentially what wcspih() does - refer to the prologue of wcshdr.h. As the final step, wcsset() is invoked, either directly or indirectly, to set the derived members of the wcsprm struct. wcsset() strips off trailing blanks in all string members and null-fills the character array.

## Field Documentation

## ◆ flag

int wcsprm::flag

(Given and returned) This flag must be set to zero whenever any of the following wcsprm struct members are set or changed:

- wcsprm::naxis (q.v., not normally set by the user),
- wcsprm::crpix,
- wcsprm::pc,
- wcsprm::cdelt,
- wcsprm::crval,
- wcsprm::cunit,
- wcsprm::ctype,
- wcsprm::lonpole,
- wcsprm::latpole,
- wcsprm::restfrq,
- wcsprm::restwav,
- wcsprm::npv,
- wcsprm::pv,
- wcsprm::nps,
- wcsprm::ps,
- wcsprm::cd,
- wcsprm::crota,
- wcsprm::altlin,
- wcsprm::ntab,
- wcsprm::nwtb,
- wcsprm::tab,
- wcsprm::wtb.

This signals the initialization routine, wcsset(), to recompute the returned members of the celprm struct. celset() will reset flag to indicate that this has been done.

PLEASE NOTE: flag should be set to -1 when wcsinit() is called for the first time for a particular wcsprm struct in order to initialize memory management. It must ONLY be used on the first initialization otherwise memory leaks may result.

## ◆ naxis

int wcsprm::naxis

(Given or returned) Number of pixel and world coordinate elements.

If wcsinit() is used to initialize the linprm struct (as would normally be the case) then it will set naxis from the value passed to it as a function argument. The user should not subsequently modify it.

## ◆ crpix

double * wcsprm::crpix

(Given) Address of the first element of an array of double containing the coordinate reference pixel, `CRPIXja`.

## ◆ pc

double * wcsprm::pc

(Given) Address of the first element of the `PCi_ja` (pixel coordinate) transformation matrix. The expected order is

struct wcsprm wcs;
wcs.pc = {PC1_1, PC1_2, PC2_1, PC2_2};

This may be constructed conveniently from a 2-D array via

double m[2][2] = {{PC1_1, PC1_2},
{PC2_1, PC2_2}};

which is equivalent to

double m[2][2];
m[0][0] = PC1_1;
m[0][1] = PC1_2;
m[1][0] = PC2_1;
m[1][1] = PC2_2;

The storage order for this 2-D array is the same as for the 1-D array, whence

wcs.pc = *m;

would be legitimate.

## ◆ cdelt

double * wcsprm::cdelt

(Given) Address of the first element of an array of double containing the coordinate increments, `CDELTia`.

## ◆ crval

double * wcsprm::crval

(Given) Address of the first element of an array of double containing the coordinate reference values, `CRVALia`.

## ◆ cunit

wcsprm::cunit

(Given) Address of the first element of an array of char[72] containing the `CUNITia` keyvalues which define the units of measurement of the `CRVALia`, `CDELTia`, and `CDi_ja` keywords.

As `CUNITia` is an optional header keyword, cunit[][72] may be left blank but otherwise is expected to contain a standard units specification as defined by WCS Paper I. Utility function wcsutrn(), described in wcsunits.h, is available to translate commonly used non-standard units specifications but this must be done as a separate step before invoking wcsset().

For celestial axes, if cunit[][72] is not blank, wcsset() uses wcsunits() to parse it and scale cdelt[], crval[], and cd[][*] to degrees. It then resets cunit[][72] to "deg".

For spectral axes, if cunit[][72] is not blank, wcsset() uses wcsunits() to parse it and scale cdelt[], crval[], and cd[][*] to SI units. It then resets cunit[][72] accordingly.

wcsset() ignores cunit[][72] for other coordinate types; cunit[][72] may be used to label coordinate values.

These variables accomodate the longest allowed string-valued FITS keyword, being limited to 68 characters, plus the null-terminating character.

## ◆ ctype

wcsprm::ctype

(Given) Address of the first element of an array of char[72] containing the coordinate axis types, `CTYPEia`.

The ctype[][72] keyword values must be in upper case and there must be zero or one pair of matched celestial axis types, and zero or one spectral axis. The ctype[][72] strings should be padded with blanks on the right and null-terminated so that they are at least eight characters in length.

These variables accomodate the longest allowed string-valued FITS keyword, being limited to 68 characters, plus the null-terminating character.

## ◆ lonpole

double wcsprm::lonpole

(Given and returned) The native longitude of the celestial pole, , given by `LONPOLEa` [deg] or by `PV`i`_2`a [deg] attached to the longitude axis which takes precedence if defined, and ...

## ◆ latpole

double wcsprm::latpole

(Given and returned) ... the native latitude of the celestial pole, , given by `LATPOLEa` [deg] or by `PV`i`_3`a [deg] attached to the longitude axis which takes precedence if defined.

lonpole and latpole may be left to default to values set by wcsinit() (see celprm::ref), but in any case they will be reset by wcsset() to the values actually used. Note therefore that if the wcsprm struct is reused without resetting them, whether directly or via wcsinit(), they will no longer have their default values.

## ◆ restfrq

double wcsprm::restfrq

(Given) The rest frequency [Hz], and/or ...

## ◆ restwav

double wcsprm::restwav

(Given) ... the rest wavelength in vacuo [m], only one of which need be given, the other should be set to zero.

## ◆ npv

int wcsprm::npv

(Given) The number of entries in the wcsprm::pv[] array.

## ◆ npvmax

int wcsprm::npvmax

(Given or returned) The length of the wcsprm::pv[] array.

npvmax will be set by wcsinit() if it allocates memory for wcsprm::pv[], otherwise it must be set by the user. See also wcsnpv().

## ◆ pv

struct pvcard * wcsprm::pv

(Given) Address of the first element of an array of length npvmax of pvcard structs.

As a FITS header parser encounters each `PVi_ma` keyword it should load it into a pvcard struct in the array and increment npv. wcsset() interprets these as required.

Note that, if they were not given, wcsset() resets the entries for `PV`i`_1`a, `PV`i`_2`a, `PV`i`_3`a, and `PV`i`_4`a for longitude axis i to match phi_0 and theta_0 (the native longitude and latitude of the reference point), `LONPOLEa` and `LATPOLEa` respectively.

## ◆ nps

int wcsprm::nps

(Given) The number of entries in the wcsprm::ps[] array.

## ◆ npsmax

int wcsprm::npsmax

(Given or returned) The length of the wcsprm::ps[] array.

npsmax will be set by wcsinit() if it allocates memory for wcsprm::ps[], otherwise it must be set by the user. See also wcsnps().

## ◆ ps

struct pscard * wcsprm::ps

(Given) Address of the first element of an array of length npsmax of pscard structs.

As a FITS header parser encounters each `PSi_ma` keyword it should load it into a pscard struct in the array and increment nps. wcsset() interprets these as required (currently no `PSi_ma` keyvalues are recognized).

## ◆ cd

double * wcsprm::cd

(Given) For historical compatibility, the wcsprm struct supports two alternate specifications of the linear transformation matrix, those associated with the `CDi_ja` keywords, and ...

## ◆ crota

double * wcsprm::crota

(Given) ... those associated with the `CROTAia` keywords. Although these may not formally co-exist with `PCi_ja`, the approach taken here is simply to ignore them if given in conjunction with `PCi_ja`.

## ◆ altlin

int wcsprm::altlin

(Given) altlin is a bit flag that denotes which of the `PCi_ja`, `CDi_ja` and `CROTAia` keywords are present in the header:

- Bit 0: `PCi_ja` is present.

- Bit 1: `CDi_ja` is present.

  Matrix elements in the IRAF convention are equivalent to the product `CDi_ja` = `CDELTia` * `PCi_ja`, but the defaults differ from that of the `PCi_ja` matrix. If one or more `CDi_ja` keywords are present then all unspecified `CDi_ja` default to zero. If no `CDi_ja` (or `CROTAia`) keywords are present, then the header is assumed to be in `PCi_ja` form whether or not any `PCi_ja` keywords are present since this results in an interpretation of `CDELTia` consistent with the original FITS specification.

  While `CDi_ja` may not formally co-exist with `PCi_ja`, it may co-exist with `CDELTia` and `CROTAia` which are to be ignored.

- Bit 2: `CROTAia` is present.

  In the AIPS convention, `CROTAia` may only be associated with the latitude axis of a celestial axis pair. It specifies a rotation in the image plane that is applied AFTER the `CDELTia`; any other `CROTAia` keywords are ignored.

  `CROTAia` may not formally co-exist with `PCi_ja`.

  `CROTAia` and `CDELTia` may formally co-exist with `CDi_ja` but if so are to be ignored.

`CDi_ja` and `CROTAia` keywords, if found, are to be stored in the wcsprm::cd and wcsprm::crota arrays which are dimensioned similarly to wcsprm::pc and wcsprm::cdelt. FITS header parsers should use the following procedure:

- Whenever a `PCi_ja` keyword is encountered:

  altlin |= 1;

- Whenever a `CDi_ja` keyword is encountered:

  altlin |= 2;

- Whenever a `CROTAia` keyword is encountered:
  altlin |= 4;

If none of these bits are set the `PCi_ja` representation results, i.e. wcsprm::pc and wcsprm::cdelt will be used as given.

These alternate specifications of the linear transformation matrix are translated immediately to `PCi_ja` by wcsset() and are invisible to the lower-level WCSLIB routines. In particular, wcsset() resets wcsprm::cdelt to unity if `CDi_ja` is present (and no `PCi_ja`).

If `CROTAia` are present but none is associated with the latitude axis (and no `PCi_ja` or `CDi_ja`), then wcsset() reverts to a unity `PCi_ja` matrix.

## ◆ velref

int wcsprm::velref

(Given) AIPS velocity code `VELREF`, refer to spcaips().

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::velref is changed.

## ◆ alt

char wcsprm::alt

(Given, auxiliary) Character code for alternate coordinate descriptions (i.e. the 'a' in keyword names such as `CTYPEia`). This is blank for the primary coordinate description, or one of the 26 upper-case letters, A-Z.

An array of four characters is provided for alignment purposes, only the first is used.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::alt is changed.

## ◆ colnum

int wcsprm::colnum

(Given, auxiliary) Where the coordinate representation is associated with an image-array column in a FITS binary table, this variable may be used to record the relevant column number.

It should be set to zero for an image header or pixel list.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::colnum is changed.

## ◆ colax

int * wcsprm::colax

(Given, auxiliary) Address of the first element of an array of int recording the column numbers for each axis in a pixel list.

The array elements should be set to zero for an image header or image array in a binary table.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::colax is changed.

## ◆ cname

wcsprm::cname

(Given, auxiliary) The address of the first element of an array of char[72] containing the coordinate axis names, `CNAMEia`.

These variables accomodate the longest allowed string-valued FITS keyword, being limited to 68 characters, plus the null-terminating character.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::cname is changed.

## ◆ crder

double * wcsprm::crder

(Given, auxiliary) Address of the first element of an array of double recording the random error in the coordinate value, `CRDERia`.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::crder is changed.

## ◆ csyer

double * wcsprm::csyer

(Given, auxiliary) Address of the first element of an array of double recording the systematic error in the coordinate value, `CSYERia`.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::csyer is changed.

## ◆ dateavg

char wcsprm::dateavg

(Given, auxiliary) The date of a representative mid-point of the observation in ISO format, yyyy-mm-dd`T`hh:mm:ss.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::dateavg is changed.

## ◆ dateobs

char wcsprm::dateobs

(Given, auxiliary) The date of the start of the observation unless otherwise explained in the comment field of the `DATE-OBS` keyword, in ISO format, yyyy-mm-dd`T`hh:mm:ss.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::dateobs is changed.

## ◆ equinox

double wcsprm::equinox

(Given, auxiliary) The equinox associated with dynamical equatorial or ecliptic coordinate systems, `EQUINOXa` (or `EPOCH` in older headers). Not applicable to ICRS equatorial or ecliptic coordinates.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::equinox is changed.

## ◆ mjdavg

double wcsprm::mjdavg

(Given, auxiliary) Modified Julian Date (MJD = JD - 2400000.5), `MJD-AVG`, corresponding to `DATE-AVG`.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::mjdavg is changed.

## ◆ mjdobs

double wcsprm::mjdobs

(Given, auxiliary) Modified Julian Date (MJD = JD - 2400000.5), `MJD-OBS`, corresponding to `DATE-OBS`.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::mjdobs is changed.

## ◆ obsgeo

double wcsprm::obsgeo

(Given, auxiliary) Location of the observer in a standard terrestrial reference frame, `OBSGEO-X`, `OBSGEO-Y`, `OBSGEO-Z` [m].

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::obsgeo is changed.

## ◆ radesys

char wcsprm::radesys

(Given, auxiliary) The equatorial or ecliptic coordinate system type, `RADESYSa`.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::radesys is changed.

## ◆ specsys

char wcsprm::specsys

(Given, auxiliary) Spectral reference frame (standard of rest), `SPECSYSa`.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::specsys is changed.

## ◆ ssysobs

char wcsprm::ssysobs

(Given, auxiliary) The spectral reference frame in which there is no differential variation in the spectral coordinate across the field-of-view, `SSYSOBSa`.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::ssysobs is changed.

## ◆ velosys

double wcsprm::velosys

(Given, auxiliary) The relative radial velocity [m/s] between the observer and the selected standard of rest in the direction of the celestial reference coordinate, `VELOSYSa`.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::velosys is changed.

## ◆ zsource

double wcsprm::zsource

(Given, auxiliary) The redshift, `ZSOURCEa`, of the source.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::zsource is changed.

## ◆ ssyssrc

char wcsprm::ssyssrc

(Given, auxiliary) The spectral reference frame (standard of rest), `SSYSSRCa`, in which wcsprm::zsource was measured.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::ssyssrc is changed.

## ◆ velangl

double wcsprm::velangl

(Given, auxiliary) The angle [deg] that should be used to decompose an observed velocity into radial and transverse components.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::velangl is changed.

## ◆ wcsname

char wcsprm::wcsname

(Given, auxiliary) The name given to the coordinate representation, `WCSNAMEa`. This variable accomodates the longest allowed string-valued FITS keyword, being limited to 68 characters, plus the null-terminating character.

It is not necessary to reset the wcsprm struct (via wcsset()) when wcsprm::wcsname is changed.

## ◆ ntab

int wcsprm::ntab

(Given) See wcsprm::tab.

## ◆ nwtb

int wcsprm::nwtb

(Given) See wcsprm::wtb.

## ◆ tab

struct tabprm * wcsprm::tab

(Given) Address of the first element of an array of ntab tabprm structs for which memory has been allocated. These are used to store tabular transformation parameters.

Although technically wcsprm::ntab and tab are "given", they will normally be set by invoking wcstab(), whether directly or indirectly.

The tabprm structs contain some members that must be supplied and others that are derived. The information to be supplied comes primarily from arrays stored in one or more FITS binary table extensions. These arrays, referred to here as "wcstab arrays", are themselves located by parameters stored in the FITS image header.

## ◆ wtb

struct wtbarr * wcsprm::wtb

(Given) Address of the first element of an array of nwtb wtbarr structs for which memory has been allocated. These are used in extracting wcstab arrays from a FITS binary table.

Although technically wcsprm::nwtb and wtb are "given", they will normally be set by invoking wcstab(), whether directly or indirectly.

## ◆ lngtyp

char wcsprm::lngtyp

(Returned) Four-character WCS celestial longitude and ...

## ◆ lattyp

char wcsprm::lattyp

(Returned) ... latitude axis types. e.g. "RA", "DEC", "GLON", "GLAT", etc. extracted from '`RA–`', '`DEC-`', '`GLON`', '`GLAT`', etc. in the first four characters of `CTYPEia` but with trailing dashes removed. (Declared as char[8] for alignment reasons.)

## ◆ lng

int wcsprm::lng

(Returned) Index for the longitude coordinate, and ...

## ◆ lat

int wcsprm::lat

(Returned) ... index for the latitude coordinate, and ...

## ◆ spec

int wcsprm::spec

(Returned) ... index for the spectral coordinate in the imgcrd[][] and world[][] arrays in the API of wcsp2s(), wcss2p() and wcsmix().

These may also serve as indices into the pixcrd[][] array provided that the `PCi_ja` matrix does not transpose axes.

## ◆ cubeface

int wcsprm::cubeface

(Returned) Index into the pixcrd[][] array for the `CUBEFACE` axis. This is used for quadcube projections where the cube faces are stored on a separate axis (see wcs.h).

## ◆ types

int * wcsprm::types

(Returned) Address of the first element of an array of int containing a four-digit type code for each axis.

- First digit (i.e. 1000s):

  - 0: Non-specific coordinate type.
  - 1: Stokes coordinate.
  - 2: Celestial coordinate (including `CUBEFACE`).
  - 3: Spectral coordinate.

- Second digit (i.e. 100s):

  - 0: Linear axis.
  - 1: Quantized axis (`STOKES`, `CUBEFACE`).
  - 2: Non-linear celestial axis.
  - 3: Non-linear spectral axis.
  - 4: Logarithmic axis.
  - 5: Tabular axis.

- Third digit (i.e. 10s):

  - 0: Group number, e.g. lookup table number, being an index into the tabprm array (see above).

- The fourth digit is used as a qualifier depending on the axis type.

  - For celestial axes:

    - 0: Longitude coordinate.
    - 1: Latitude coordinate.
    - 2: `CUBEFACE` number.

  - For lookup tables: the axis number in a multidimensional table.

`CTYPEia` in "4-3" form with unrecognized algorithm code will have its type set to -1 and generate an error.

## ◆ padding

void * wcsprm::padding

(An unused variable inserted for alignment purposes only.)

## ◆ lin

struct linprm wcsprm::lin

(Returned) Linear transformation parameters (usage is described in the prologue to lin.h).

## ◆ cel

struct celprm wcsprm::cel

(Returned) Celestial transformation parameters (usage is described in the prologue to cel.h).

## ◆ spc

struct spcprm wcsprm::spc

(Returned) Spectral transformation parameters (usage is described in the prologue to spc.h).

## ◆ err

struct wcserr * wcsprm::err

(Returned) If enabled, when an error status is returned, this struct contains detailed information about the error, see wcserr_enable().

## ◆ m_padding

void * wcsprm::m_padding

(For internal use only.)

## ◆ m_flag

int wcsprm::m_flag

(For internal use only.)

## ◆ m_naxis

int wcsprm::m_naxis

(For internal use only.)

## ◆ m_crpix

double * wcsprm::m_crpix

(For internal use only.)

## ◆ m_pc

double * wcsprm::m_pc

(For internal use only.)

## ◆ m_cdelt

double * wcsprm::m_cdelt

(For internal use only.)

## ◆ m_crval

double * wcsprm::m_crval

(For internal use only.)

## ◆ m_cunit

wcsprm::m_cunit

(For internal use only.)

## ◆ m_ctype

wcsprm::m_ctype

(For internal use only.)

## ◆ m_pv

struct pvcard * wcsprm::m_pv

(For internal use only.)

## ◆ m_ps

struct pscard * wcsprm::m_ps

(For internal use only.)

## ◆ m_cd

double * wcsprm::m_cd

(For internal use only.)

## ◆ m_crota

double * wcsprm::m_crota

(For internal use only.)

## ◆ m_colax

int * wcsprm::m_colax

(For internal use only.)

## ◆ m_cname

wcsprm::m_cname

(For internal use only.)

## ◆ m_crder

double * wcsprm::m_crder

(For internal use only.)

## ◆ m_csyer

double * wcsprm::m_csyer

(For internal use only.)

## ◆ m_tab

struct tabprm * wcsprm::m_tab

(For internal use only.)

## ◆ m_wtb

struct wtbarr * wcsprm::m_wtb

(For internal use only.)